Troubleshooting Sybase Error Code from Error 20786 to 20800

SQLServerF1

Sybase Error Code 20786
Sybase SQL Code –1000126L
This database must be upgraded. %1
Sybase Error Code 20787
Sybase SQL Code –1000127L
The LIMIT specified, ‘%2’, is too large. %1
Sybase Error Code 20788
Sybase SQL Code –1000128L
You must deletee from join index %2 before you can deletee from table %3. %1
Sybase Error Code 20789
Sybase SQL Code 1000129L
%1 row(s) deleted from index ‘%2’ in %3 seconds.

Sybase Error Code 20790
Sybase SQL Code 1000130L
%1 row(s) deleted from index ‘%2’ on field ‘%3’, %4 seconds.
Sybase Error Code 20791
Sybase SQL Code –1000131L
The DELIMITED BY and LIMIT options are valid for WD indexes only. %1
Sybase Error Code 20792
Sybase SQL Code –1000132L
In table ‘%2’, the START ROW ID value (%3) must be greater than %4. Data has already been inserted at this location. %1
Sybase Error Code 20793
Sybase SQL Code –1000133L
During the LOAD into table ‘%2’, the LOAD statement’s column count (%3) must be between 1 and %4. Check the LOAD statement’s ‘load-specification’. %1
Sybase Error Code 20794
Sybase SQL Code –1000134L
Column ‘%2’ is being inserted into twice by this INSERT command. %1

Sybase Error Code 20795
Sybase SQL Code –1000135L
Cannot open the existence list for table ‘%2’. %1
Sybase Error Code 20796
Sybase SQL Code –1000136L
A mismatch exists between the existence bitmaps in the insert object. %1
Sybase Error Code 20797
Sybase SQL Code –1000137L
While inserting, table ‘%2’ already had a Complete started. %1
Sybase Error Code 20798
Sybase SQL Code –1000138L
A data conversion error has occurred while loading record %2. This error should be reported to Sybase. %1
Sybase Error Code 20799
Sybase SQL Code –1000139L
You cannot insertt into table ‘%2’ past the original end of the table while there are %3 join virtual tables based on it. %1
Sybase Error Code 20800
Sybase SQL Code –1000140L
You cannot change column ‘%2’ because it is a ‘link’ column. %1

Above are list of Sybase Error Code Messages from Error Code 20786 to 20800 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20771 to 20785

SQLServerF1

Sybase Error Code 20771
Sybase SQL Code –1000111L
The wrong FP Index has been opened for a field. %1
Sybase Error Code 20772
Sybase SQL Code –1000112L
The EBM on the field’s columnDescriptor does not match the column EBM on the FPIndex. %1
Sybase Error Code 20773
Sybase SQL Code –1000113L
Field %2 does not have an FP index. %1
Sybase Error Code 20774
Sybase SQL Code –1000114L
CMP index can only be created on two distinct columns having identical datatypes. %1

Sybase Error Code 20775
Sybase SQL Code –1000115L
You cannot delete from join index %2 in the ‘top’ table %3. %1
Sybase Error Code 20776
Sybase SQL Code –1000116L
A temporary table cannot participate in a JOIN INDEX. ‘%2’ is a temporary table. %1
Sybase Error Code 20777
Sybase SQL Code 1000117L
The data to be inserted into table ‘%2’, column ‘%1’ cannot be converted to the datatype of the column. NULL will be inserted if the column allows NULLs.
Sybase Error Code 20778
Sybase SQL Code –1000118L
Join index %2 was not found in the catalog. %1
Sybase Error Code 20779
Sybase SQL Code 1000119L
The data to be inserted into table ‘%2′, column `%1’ from row %3 of the select results cannot be converted to the datatype of the destination column. NULL

will be inserted if the column allows NULLs.
Sybase Error Code 20780
Sybase SQL Code –1000120L
Join %2 was not found in the catalog. %1
Sybase Error Code 20781
Sybase SQL Code –1000121L
binary data not supported on data longer than 32767 %2, %1
Sybase Error Code 20782
Sybase SQL Code 1000122L
The data to update table ‘%2′, column `%1’ cannot be converted to the datatype of the destination column for update number %3 to the table. NULL will be inserted if the column allows NULLs.
Sybase Error Code 20783
Sybase SQL Code –1000123L
Index ‘%2’ cannot be created. Multicolumn indexes must be created using distinct columns. %1
Sybase Error Code 20784
Sybase SQL Code –1000124L
Function or Operator not supported on data longer than %2 bytes. %1
Sybase Error Code 20785
Sybase SQL Code –1000125L
Table %2 is not part of join index %3. %1

Above are list of Sybase Error Code Messages from Error Code 20771 to 20785 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20755 to 20770

SQLServerF1

Sybase Error Code 20755
Sybase SQL Code 1000095L
The join index %1 could not be used in the query because it needs synchronization.
Sybase Error Code 20756
Sybase SQL Code 1000096L
Delimiter %1 %2 nulls, %3%4%5 %6
Sybase Error Code 20757
Sybase SQL Code –1000097L
Parse Error in Command String at ‘%2’. %1
Sybase Error Code 20758
Sybase SQL Code –1000098L
Creating a join index on a column of type ‘varchar’ or ‘varbinary’ with size > 255 is not supported. %1

Sybase Error Code 20759
Sybase SQL Code –1000099L
The PAGE SIZE divided by the BLOCK SIZE must be equal to 2, 4, 8, or 16. DATABASE: %2 PAGE SIZE: %3 BLOCK SIZE: %4 %1
Sybase Error Code 20760
Sybase SQL Code –1000100L
Cannot INSERT, LOAD, or UPDATE a join virtual table. %1
Sybase Error Code 20761
Sybase SQL Code –1000101L
%2 not supported by Sybase IQ. %1
Sybase Error Code 20762
Sybase SQL Code –1000102L
Cannot update table %2 because it is defined in one or more join indexes. %1

Sybase Error Code 20763
Sybase SQL Code –1000103L
Cannot find an index for field ‘%2’. Every field must have at least one index. Current IndexCount = %3. %1
Sybase Error Code 20764
Sybase SQL Code 1000104L
in join virtual table ‘%1’%2
Sybase Error Code 20766
Sybase SQL Code –1000106L
Local temporary table, %2, must be committed in order to create an index. %1
Sybase Error Code 20767
Sybase SQL Code 1000107L
For table ‘%1’ in join virtual table ‘%2’, \n%3 left outer rows with %4 columns will be moved (inserted/deleted).\n
Sybase Error Code 20768
Sybase SQL Code 1000108L
The DELETE where clause yielded %1 rows, but table ‘%2’ has no data.
Sybase Error Code 20769
Sybase SQL Code 1000109L
For table %1, join index %2 was modified. %3 rows were deleted.
Sybase Error Code 20770
Sybase SQL Code –1000110L
The wrong SIndex has been opened for a fast projection index. %1

Above are list of Sybase Error Code Messages from Error Code 20755 to 20770 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20739 to 20754

SQLServerF1

Sybase Error Code 20739
Sybase SQL Code –1000079L
IQ SIZE of ‘%2’ for database ‘%3’ is not valid. %1
Sybase Error Code 20740
Sybase SQL Code 1000080L
Join index %1 already synchronized.
Sybase Error Code 20741
Sybase SQL Code –1000081L
The field array for table ‘%2’ must have at least 1 entry; it has %3 entries. %1
Sybase Error Code 20742
Sybase SQL Code –1000082L
The insert must contain all of the table %2 columns because it participates in one or more joins. %1
Sybase Error Code 20743
Sybase SQL Code –1000083L
The field array entry must be given a name. %1

Sybase Error Code 20744
Sybase SQL Code –1000084L
The %2th join field array entry for table ‘%3’ must have a name. %1
Sybase Error Code 20745
Sybase SQL Code –1000085L
The join field array for table ‘%2’ must have at least one entry. %1
Sybase Error Code 20746
Sybase SQL Code 1000086L
Length %1 %2%3%4
Sybase Error Code 20747
Sybase SQL Code 1000087L
Delimiter %1 %2%3%4
Sybase Error Code 20748
Sybase SQL Code 1000088L
Offset %1, Length %2, %3 nulls, %4%5%6 %7
Sybase Error Code 20749

Sybase SQL Code 1000089L
Length %1, %2 nulls, %3%4%5 %6
Sybase Error Code 20750
Sybase SQL Code 1000090L
%1, %2 nulls, %3%4%5 %6
Sybase Error Code 20751
Sybase SQL Code 1000091L
%1, %2 nulls, %3%4%5 %6
Sybase Error Code 20752
Sybase SQL Code –1000092L
Table %2 must have a name for the join field array. %1
Sybase Error Code 20753
Sybase SQL Code 1000093L
%1, %2 nulls, %3%4%5 %6
Sybase Error Code 20754
Sybase SQL Code –1000094L
Sufficient memory cannot be found for the LOAD. Increasing the Load_Memory_MB or decreasing the BLOCK FACTOR or BLOCK SIZE will allow the LOAD to proceed. %1

Above are list of Sybase Error Code Messages from Error Code 20739 to 20754 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20723 to 20738

SQLServerF1

Sybase Error Code 20723
Sybase SQL Code –1000063L
Cannot enforce the NOT NULL constraint. Column %2 has NULL data. %1
Sybase Error Code 20724
Sybase SQL Code –1000064L
Column %2 can not be altered because it participates in join %3. %1
Sybase Error Code 20725
Sybase SQL Code –1000065L
Table %2 must be owned by the creator of the join. %1
Sybase Error Code 20726
Sybase SQL Code –1000066L
ALTER on the column would interfere with the natural join to table %2 in join %3. %1

Sybase Error Code 20727
Sybase SQL Code –1000067L
Table ‘%2’ is not defined in the catalog. %1
Sybase Error Code 20728
Sybase SQL Code 1000068L
The ‘%1’ join index is in use for table ‘%2’.
Sybase Error Code 20729
Sybase SQL Code 1000069L
%1; %2 blocks; %3
Sybase Error Code 20730
Sybase SQL Code 1000070L
File listing:
Sybase Error Code 20731
Sybase SQL Code 1000071L
%1
Sybase Error Code 20732
Sybase SQL Code 1000072L
Hole listing (%1):

Sybase Error Code 20733
Sybase SQL Code 1000073L
start: %1; size: %2
Sybase Error Code 20734
Sybase SQL Code 1000074L
Offset %1 Length %2, %3%4%5
Sybase Error Code 20735
Sybase SQL Code 1000075L
%1, %2%3%4
Sybase Error Code 20736
Sybase SQL Code 1000076L
%1, %2%3%4
Sybase Error Code 20737
Sybase SQL Code 1000077L
%1, %2%3%4
Sybase Error Code 20738
Sybase SQL Code –1000078L
IQ PAGE SIZE of ‘%2’ for database ‘%3’ is not valid. %1

Above are list of Sybase Error Code Messages from Error Code 20723 to 20738 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20708 to 20722

SQLServerF1

Sybase Error Code 20708
Sybase SQL Code –1000048L
For table pair %2, table ‘%3’ has a scale mismatch in column %4. %1
Sybase Error Code 20709
Sybase SQL Code –1000049L
‘%2’ is being used in a self join. Self joins are not allowed. %1
Sybase Error Code 20710
Sybase SQL Code –1000050L
Table ‘%2’ is used in the join twice. %1
Sybase Error Code 20711
Sybase SQL Code –1000051L
Cannot retrieve a row from the SYSIQJOINIXTABLE system table. %1

Sybase Error Code 20712
Sybase SQL Code –1000052L
Cannot delete a row from the SYSIQJOINIXTABLE system table. %1
Sybase Error Code 20713
Sybase SQL Code –1000053L
Cannot commit changes to the SYSIQJOINIXTABLE system table. %1
Sybase Error Code 20714
Sybase SQL Code –1000054L
Cannot open %2 in Meta (exclusive) mode. Object is already open. %1
Sybase Error Code 20715
Sybase SQL Code 1000055L
Warning: %1
Sybase Error Code 20716
Sybase SQL Code –1000056L
Cannot convert from datatype ‘%2’ to ‘%3’ for column ‘%4’. %1

Sybase Error Code 20717
Sybase SQL Code –1000057L
Column ‘%2’ has an unknown datatype: ‘%3’. %1
Sybase Error Code 20718
Sybase SQL Code 1000058L
Platform: %1
Sybase Error Code 20719
Sybase SQL Code 1000059L
Unable to synchronize join index ‘%1’.
Sybase Error Code 20720
Sybase SQL Code –1000060L
Column ‘%2’, PRECISION (%3) cannot be greater than %4. %1
Sybase Error Code 20721
Sybase SQL Code –1000061L
Column %2, PRECISION (%3) cannot be less than 0. %1
Sybase Error Code 20722
Sybase SQL Code –1000062L
Cannot add column ‘%3’ with ‘not null’ constraint on table %2 with data. %1

Above are list of Sybase Error Code Messages from Error Code 20708 to 20722 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20693 to 20707

SQLServerF1

Sybase Error Code 20693
Sybase SQL Code 1000033L
Database: %1
Sybase Error Code 20694
Sybase SQL Code 1000034L
Table Name Relationship
Sybase Error Code 20695
Sybase SQL Code –1000035L
Using views in CREATE JOIN INDEX is not supported. %1
Sybase Error Code 20696
Sybase SQL Code 1000036L
%1. %2 joined to ‘%3’ %4

Sybase Error Code 20697
Sybase SQL Code 1000037L
Sybase Error Code 20698
Sybase SQL Code 1000038L
Backup date: %1
Sybase Error Code 20699
Sybase SQL Code 1000039L
Backup created by: %1
Sybase Error Code 20700
Sybase SQL Code 1000040L
Comment: %1
Sybase Error Code 20701
Sybase SQL Code 1000041L
Backup version: %1

Sybase Error Code 20702
Sybase SQL Code 1000042L
Number of archive media in backup: %1
Sybase Error Code 20703
Sybase SQL Code 1000043L
Number of files in backup: %1
Sybase Error Code 20704
Sybase SQL Code –1000044L
The join for table ‘%2’ does not have enough columns defined (%3). %1
Sybase Error Code 20705
Sybase SQL Code –1000045L
Index %2 does not exist. %1
Sybase Error Code 20706
Sybase SQL Code –1000046L
No Field passed to PutMCIField. %1
Sybase Error Code 20707
Sybase SQL Code –1000047L
For table pair %2, table ‘%3’ has a precision mismatch in column %4. %1

Above are list of Sybase Error Code Messages from Error Code 20693 to 20707 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20678 to 20692

SQLServerF1

Sybase Error Code 20678
Sybase SQL Code –1000018L
The object cannot be opened for DROP or ALTER. It is already open. %1
Sybase Error Code 20679
Sybase SQL Code –1008008L
You cannot TRUNCATE a join virtual table.
Sybase Error Code 20680
Sybase SQL Code –1008009L
This statement is not supported by Sybase IQ.
Sybase Error Code 20681
Sybase SQL Code –1008010L
A request was made to delete the primary key constraint, but the primary key cannot be found.

Sybase Error Code 20682
Sybase SQL Code –1000022L
Index ‘%2’ has an invalid index type: %3. %1
Sybase Error Code 20683
Sybase SQL Code –1000023L
The proposed join does not form a clearly connected list. (table ‘%2’) %1
Sybase Error Code 20684
Sybase SQL Code –1000024L
For table pair %2, table ‘%3’ has a datatype mismatch for column %4. %1
Sybase Error Code 20685
Sybase SQL Code –1008011L
Cannot create the join index because the datatype of the underlying join virtual table column is not equal to the datatype of the corresponding base table column ‘%1’.

Sybase Error Code 20686
Sybase SQL Code –1000026L
The join virtual table for table ‘%2’ has duplicate columns in positions %3 and %4. %1
Sybase Error Code 20687
Sybase SQL Code –1000027L
The join virtual table ‘%2’ does not have any data. %1
Sybase Error Code 20688
Sybase SQL Code –1000028L
For table pair %2, table ‘%3’ has a length value mismatch for column %4. %1
Sybase Error Code 20689
Sybase SQL Code –1000029L
Cannot open the requested object for write in the current transaction (%2). Another user has write access in transaction %3. %1
Sybase Error Code 20690
Sybase SQL Code 1000030L
\nMaster archive header information\n
Sybase Error Code 20691
Sybase SQL Code 1000031L
Join Index ‘%1’ created from the following join relations:
Sybase Error Code 20692
Sybase SQL Code 1000032L
The ultimate/top table is %1\n

Above are list of Sybase Error Code Messages from Error Code 20678 to 20692 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20647 to 20662

SQLServerF1

Sybase Error Code 20647
Sybase SQL Code –1013077L
ROW DELIMITED BY is valid only when all columns are delimited or ASCII fixed-width. %1
Sybase Error Code 20648
Sybase SQL Code –1013078L
Insert Pass 1 CPU utilization
Sybase Error Code 20649
Sybase SQL Code –1013079L
Insert Pass 1 user (%)
Sybase Error Code 20650
Sybase SQL Code –1013080L
Insert Pass 1 system (%)

Sybase Error Code 20651
Sybase SQL Code –1013081L
Insert Pass 2 CPU utilization
Sybase Error Code 20652
Sybase SQL Code –1013082L
Insert Pass 2 user (%)
Sybase Error Code 20653
Sybase SQL Code –1013083L
Insert Pass 2 system (%)
Sybase Error Code 20654
Sybase SQL Code –1013084L
Insert Commit CPU utilization
Sybase Error Code 20655
Sybase SQL Code –1013085L
Insert Commit user (%)

Sybase Error Code 20656
Sybase SQL Code –1013086L
Insert Commit system (%)
Sybase Error Code 20657
Sybase SQL Code –1013087L
Total Insert CPU utilization
Sybase Error Code 20658
Sybase SQL Code –1013088L
Insert Total user (%)
Sybase Error Code 20659
Sybase SQL Code –1013089L
Insert Total system (%)
Sybase Error Code 20660
Sybase SQL Code –1000000L
Both QUOTES and ESCAPES options must be OFF. %1
Sybase Error Code 20662
Sybase SQL Code –1000002L
Cannot get the index id for %2 from the catalog. %1

Above are list of Sybase Error Code Messages from Error Code 20647 to 20662 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 20632 to 20646

SQLServerF1

Sybase Error Code 20632
Sybase SQL Code –1013062L
Expected ‘%2’ delimited column type on input, but encountered a row delimiter instead. Probable cause is a mismatch between the specified column delimiter and the column delimiter used in the input file. %1
Sybase Error Code 20633
Sybase SQL Code –1013063L
Expected raw-data column type ‘%2’ on input, but no input data exists. %1
Sybase Error Code 20634
Sybase SQL Code –1013064L
Row delimiter not seen during scan of input file. At least one of the input rows is missing a terminator. %1
Sybase Error Code 20635
Sybase SQL Code –1013065L
Row delimiter ‘%2’ and column delimiter ‘%3’ cannot be substrings of each other. %1

Sybase Error Code 20636
Sybase SQL Code –1013066L
The %2 load option can be specified only once. %1
Sybase Error Code 20637
Sybase SQL Code –1013067L
Option CONVERSION ERROR must be OFF when IGNORE CONSTRAINT DATA VALUE or ALL is specified. %1
Sybase Error Code 20638
Sybase SQL Code –1013068L
Constraint ‘%2’ violated: Invalid value for column ‘%3’ in table ‘%4’. %1
Sybase Error Code 20639
Sybase SQL Code –1008003L
Cannot drop join virtual table ‘%1’.
Sybase Error Code 20640
Sybase SQL Code –1013070L
Cannot specify check constraints off and ignore all, ignore check, logl all or log check during load. %1

Sybase Error Code 20641
Sybase SQL Code –1013071L
Constraint ‘%2’ violated: Invalid value in table ‘%3’. %1
Sybase Error Code 20642
Sybase SQL Code –1008036L
Table %1 already has an Identity/Autoincrement Column.
Sybase Error Code 20643
Sybase SQL Code –1008037L
Cannot drop %1 %2: set option ‘identity_insert’ must be off.
Sybase Error Code 20644
Sybase SQL Code –1000293L
Cannot insert or update Column %2: set option ‘identity_insert’ to the specific table name containing the identity column to be modified. %1
Sybase Error Code 20645
Sybase SQL Code –1000294L
Cannot set ‘identity_insert’, it is already on for a different table. %1
Sybase Error Code 20646
Sybase SQL Code –1000295L
Invalid table name %2 specified for option ‘identity_insert’. %1

Above are list of Sybase Error Code Messages from Error Code 20632 to 20646 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 
1 2 3 4 5 11