Teradata SQL Error and Failure Codes from Error 7448 To 7457

7448 Mload table %TVMID cannot be restarted.
Explanation: The user attempted to restart an Mload job that was aborted during the Apply Phase and a RELEASE
MLOAD with “IN APPLY” option had been executed on the target table.
Generated By: STPEBE
For Whom: User.
Notes: Mload does not allow any restart on target tables that were aborted during the Apply Phase and a RELEASE
MLOAD with “IN APPLY” option had been executed on these tables. It is possible that the fallback and/or NUSIs of a target
table have been dropped prior to the restart.
Remedy: Drop any existing fallback and NUSIs and run RELEASE MLOAD with “IN APPLY” option. Once the table is
fully available, it may be desirable to rerun the Mload job; but many Mload jobs should NOT be rerun, as rerunning them
would violate logical data integrity. If the table must be abandoned, either drop or delete, and then regenerate the table or
restore the table from backups.

7449 Mload table %TVMID is not in the Application Phase.
Explanation: The user attempted to release an Mload Apply Phase Lock on a table that has an Mload Acquisition Lock.
Generated By: STPERE
For Whom: User.
Notes: None.
Remedy: Rerun the RELEASE MLOAD statement without the “IN APPLY” option.

7450 Warning: Table is structurally okay but some delete, insert, or update was partially done on
the table.
Explanation: The user released an Mload Apply or Restoration Lock on a table that was partially deleted, inserted, or
updated by the previously aborted Mload job.
Generated By: SutCoCo
For Whom: User.
Notes: The table was partially updated by the previously aborted Mload job and therefore the user has to be very cautious
about user application integrity before deciding to rerun the Mload job because by doing that some rows could be
changed unintentionally.
Remedy: Rerun the previously aborted Mload job if it will not violate user application integrity (i.e. change a previously
updated row) and also recreate fallback and NUSIs as necessary. Alternatively, delete all rows or drop the table.

7451 Invalid timestamp.
Explanation: This error occurs when an EVL module expects a timestamp value with valid year, month, day, hour, minute,
and second values.
Generated By: EVL modules.
For Whom: End User.
Notes: Year, Month, Day, hour, minute, and second fields of the timestamp value must be valid.
Remedy: Correct and resubmit the request.

7452 Invalid interval.
Explanation: This error occurs when an EVL module expects an interval value with valid year, month, day, hour, minute,
or second values.
Generated By: EVL modules.
For Whom: End User.
Notes: Year, Month, Day, hour, minute, or second fields of the interval value must be valid.
Remedy: Correct and resubmit the request.

7453 Interval field overflow.
Explanation: This error occurs when an EVL module cannot represent an interval value with its defined precision.
Generated By: EVL modules.
For Whom: End User.
Remedy: Correct and resubmit the request.

7454 DateTime field overflow.
Explanation: This error occurs when an EVL module cannot represent a time or timestamp value with its defined precision.
Generated By: EVL modules.
For Whom: End User.
Remedy: Correct and resubmit the request.

7455 Invalid Time Zone specified.
Explanation: The specified value does not represent a vald time zone displacement or time zone string. Or, the time
zone displacement cannot be determined for the time zone string or, the time zone displacement determined for the time
zone string is not valid. A time zone displacement must be between INTERVAL -’12:59’ HOUR TO MINUTE and INTERVAL
’14:00’ HOUR TO MINUTE.
Generated By: OPT and EVL modules.
For Whom: End User.
Remedy: Correct and resubmit the request.

7457 Warning: Mload had completed processing on the primary data subtable.
Explanation: The user released an Mload Apply or Restoration Lock on a table that the previously aborted Mload job
had done processing on the primary data.
Generated By: SutCoCo
For Whom: User.
Notes: All changes had been applied to the primary data subtable since the previously aborted Mload job had completed
processing on the subtable.
Remedy: Recreate fallback and NUSIs as necessary.

Above are list of Teradata Errors or Failure Codes from Error 7448 To 7457 received while performing certain operation against Teradata Database or related products.

What are Teradata Database Errors?

In general, each Teradata error message contains the following information:
• The message number.
• The message text. This text is usually returned with the message number. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.
• Generated-by text that indicates the software module which initiated the message. This field serves a diagnostic purpose for support and development personnel.
• A remedy which suggests how to resolve the condition.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Teradata SQL Error and Failure Codes and Error Messages on Windows, Linux Operating Systems.

 

Teradata SQL Error and Failure Codes from Error 5533 To 5543

5533 Too many MULTITSR Parcels.
Explanation: The submitted Stored Procedure is too large to handle.
Generated By: Pardrivr.
For Whom: End User
Remedy: Reduce the size of the Stored procedure and submit the request.

5534 SPOptions Parcel information is invalid.
Explanation: Print Option was not ’P’ or ’N’. SPL text Option was not 1 or 0.
Generated By: Pardrivr.
For Whom: System Support Representative.
Remedy: Correct the program and resubmit the request.

5535 No SPL source text available for stored procedure “%VSTR”.
Explanation: SPL Text is not available in SPTable for the stored procedure specified to display it.
Generated By: RES modules.
For Whom: End User
Remedy: Correct the SQL and resubmit the request.

5536 Bad table definition for SystemFE.%VSTR.
Explanation: The user is attempting to use the Target Level Emulation feature, but for some reason the DDL has been
changed from its initial definition. The appropriate fields expected by this feature no longer exist in either SystemFE. opt_cost_table or SystemFE.opt_ras_table.
Generated By: OPT modules.
For Whom: End User.
Remedy: Drop the appropriate SystemFE table and run DIPSYSFE to recreate the table with the correct definition. If after this the same error still occurs, please contact the Global Support Center.

5537 Internal error while cleaning up Request Level Cost Segment.
Explanation: This is an internal error with the Target Level Emulation Feature.
Generated By: OPT modules.
For Whom: Internal
Remedy: Please save the traceback and any pertinent information that would help an analyst reproduce the problem,
and contact the Global Support Center.

5538 Internal error while cleaning up Session Level Cost Segment.
Explanation: This is an internal error with the Target Level Emulation Feature.
Generated By: OPT modules.
For Whom: Internal
Remedy: Please save the traceback and any pertinent information that would help an analyst reproduce the problem,
and contact the Global Support Center.

5539 Internal error while cleaning up IFP Level Cost Segment.
Explanation: This is an internal error with the Target Level Emulation Feature.
Generated By: OPT modules.
For Whom: Internal
Remedy: Please save the traceback and any pertinent information that would help an analyst reproduce the problem,
and contact the Global Support Center.

5540 Target name “%VSTR” not found.
Explanation: The user attempted to set the optimizer costs to a target system name which has not been loaded to SystemFE.
opt_cost_table.
Generated By: OPT modules.
For Whom: End User.
Remedy: Fix the target system name specified or update the SYSTEMFE.OPT_COST_TABLE with dumped costs from
the desired system.

5541 Local instance of temporary table ’%VSTR’ does not exist in current session.
Explanation: The user referenced the local instance of a temporary table which does not exist in current session.
Generated By: RES modules.
For Whom: End User.
Remedy: Resubmit request after local instance of temporary table has been created.

5542 Only Select, Insert, Delete or Update statements can be captured.
Explanation: The DUMP EXPLAIN, INSERT EXPLAIN, and EXPLAIN IN XML commands can be done only on
SELECT, INSERT, UPDATE or DELETE statements.
Generated By: Parser
For Whom: End User.
Remedy: Do not submit DUMP EXPLAIN, INSERT EXPLAIN, or EXPLAIN IN XML commands on requests other than
SELECT, INSERT, UPDATE or DELETE statements.

5543 There were NO costs enabled to turn off.
Explanation: An attempt was made to SET COSTS {NOT | TPA} ON FOR LEVEL, but NO costs were found to be
enabled at the specified level.
Generated By: OPT modules.
For Whom: End User.
Remedy: This error is a warning. The only remedy is to SET COSTS ON FOR {SESSION | IFP | SYSTEM} before turning
costs off.

Above are list of Teradata Errors or Failure Codes from Error 5533 To 5543 received while performing certain operation against Teradata Database or related products.

What are Teradata Database Errors?

In general, each Teradata error message contains the following information:
• The message number.
• The message text. This text is usually returned with the message number. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.
• Generated-by text that indicates the software module which initiated the message. This field serves a diagnostic purpose for support and development personnel.
• A remedy which suggests how to resolve the condition.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Teradata SQL Error and Failure Codes and Error Messages on Windows, Linux Operating Systems.

 

Troubleshooting SAP HANA Error Codes from Error 404 to 423

SQLServerF1

SAP HANA SQL Error Code 404
Invalid (non-existent) structured privilege name
SAP HANA SQL Error Code 405
Cannot use duplicate structured privilege name
SAP HANA SQL Error Code 406
INSERT, UPDATE and UPSERT are disallowed on the generated field
SAP HANA SQL Error Code 407
Invalid date format
SAP HANA SQL Error Code 408
Password or parameter required for user

SAP HANA SQL Error Code 409
Multiple values for a parameter not supported
SAP HANA SQL Error Code 410
Invalid privilege namespace
SAP HANA SQL Error Code 411
Invalid table type
SAP HANA SQL Error Code 412
Invalid password layout
SAP HANA SQL Error Code 413
Last n passwords can not be reused
SAP HANA SQL Error Code 414
User is forced to change password

SAP HANA SQL Error Code 415
User is deactivated
SAP HANA SQL Error Code 416
User is locked
SAP HANA SQL Error Code 417
Can’t drop without CASCADE specification
SAP HANA SQL Error Code 418
Invalid view query for creation
SAP HANA SQL Error Code 419
Can’t drop with RESTRICT specification
SAP HANA SQL Error Code 420
Password change currently not allowed
SAP HANA SQL Error Code 421
Cannot create fulltext index
SAP HANA SQL Error Code 422
Privileges must be either all SQL or all from one namespace
SAP HANA SQL Error Code 423
LiveCache error

Above are list of SAP HANA Error codes from Error code 404 to 423 received while performing certain operation against SAP HANA related products.

What are SAP HANA Error Messages?

SAP HANA error codes are a set of error codes for use by all SAP HANA products. Every SAP HANA error message returned is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about SAP HANA Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

DB2 SQL Errors Codes and Error Messages and Warnings from Error -407 to -409

SQLServerF1

Error: DB2 SQL Error: SQLCODE=-407, SQLSTATE=23502, SQLERRMC=TBSPACEID=, TABLEID=, COLNO=, DRIVER=
AN UPDATE, INSERT, OR SET VALUE
IS NULL, BUT THE OBJECT COLUMN
column-name CANNOT CONTAIN NULL
VALUES
Explanation: One of the following conditions
occurred:
v A null insert or update value was specified for a
column defined as NOT NULL.
v A SET transition variable statement specified a NULL
value for column defined as NOT NULL without the
WITH DEFAULT clause in the table definition.
v The update or insert value was DEFAULT, but the
object column was declared as NOT NULL without
WITH DEFAULT in the table definition.
Consequently:
– A default value of NULL cannot be inserted into
that column.
– An update cannot set default values of NULL in
that column.
– A SET transition variable statement in a trigger
cannot set default values of NULL in that column.
v The column name list for the INSERT statement
omits a column declared NOT NULL and without
WITH DEFAULT in the table definition.
v The view for the INSERT statement omits a column
declared NOT NULL and without WITH DEFAULT
in the base table definition.
v A null insert value was specified for a ROWID
column.
System action: The statement cannot be executed. The
‘column-name’ might be returned in the SQLCA,
depending on the syntax of the SQL statement in which
the error was detected.
Programmer response: Examine the definition of the
object table to determine which columns of the table
have the NOT NULL attribute or have a type of
ROWID, and correct the SQL statement accordingly.
SQLSTATE: 23502

Error: DB2 SQL Error: SQLCODE=-408, SQLSTATE=42821, SQLERRMC=TBSPACEID=, TABLEID=, COLNO=, DRIVER=
THE VALUE IS NOT COMPATIBLE
WITH THE DATA TYPE OF ITS
TARGET. TARGET NAME IS name
Explanation: A statement failed required assignment
rule checking.
name The name of the target of the assignment.
The data type that is to be assigned is incompatible
with the declared data type of the assignment target.
Both data types must be:
v Numeric
v Character (see restriction)
v Graphic (see restriction)
v Dates or character (see restriction)
v Times or character (see restriction)
v Timestamps or character (see restriction)
v Row IDs
v The same distinct types
v XML
v Result set locator
v Table locator
Restrictions:
v Dates, times, and timestamps cannot be assigned to a
character column that has a field procedure.
v Character and graphic data types are compatible
when using Unicode.
System action: The statement cannot be processed.
Programmer response: Examine the current definition
for the object table, procedure, user-defined function,
host variable, or SQL variable, and ensure that the
variable, constant, or result of an expression that is
assigned to the object has the proper data type. In some
cases, you can convert the value to the proper data
type by using a function such as CHAR or DECIMAL.
If the target is a result set locator, the application might
have tried to explicitly assign an invalid locator value
to a result set locator. Use the ASSOCIATE LOCATORS
statement to get a valid locator value for a result set
into a locator variable. Then, reference the result set
locator in an ALLOCATE CURSOR statement.
SQLSTATE: 42821

Error: DB2 SQL Error: SQLCODE=-409, SQLSTATE=42607, SQLERRMC=TBSPACEID=, TABLEID=, COLNO=, DRIVER=
INVALID OPERAND OF A COUNT
FUNCTION
Explanation: The operand of the COUNT or
COUNT_BIG function in the statement violates SQL
syntax. A common error is a column name or other
expression without DISTINCT.
System action: The statement cannot be executed.
Programmer response: Correct the syntax and
resubmit the statement. Refer to Chapter 3 of SQL
Reference for information about the proper form for the
operands of a COUNT or COUNT_BIG function.
SQLSTATE: 42607

Above are list of DB2 SQL Errors and Warnings from Error -407 to -409 received while performing certain operation against DB2 Database or related products.

SQLCODE – Regardless of whether the application program provides an SQLCA or a stand-alone variable, SQLCODE is set by DB2 after each SQL statement is
executed. DB2 conforms to the ISO/ANSI SQL standard as follows:
If SQLCODE = 0, execution was successful.
If SQLCODE > 0, execution was successful with a warning.
If SQLCODE < 0, execution was not successful.
SQLCODE = 100, “no data” was found. For example, a FETCH statement returned no data because the cursor was positioned after the last row of the result table.

SQLSTATE – SQLSTATE is also set by DB2 after the execution of each SQL statement. Thus, application programs can check the execution of SQL statements by testing SQLSTATE instead of SQLCODE.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about DB2 SQL Error Codes and Error Messages on Windows, Linux and Z/OS Operating Systems.

 

SQL Server Errors or Failures from Error: 33419 to Error: 33439

SQLServerF1

Error: 33419, Severity: 16, Function %ls is only valid on the varbinary(max) FILESTREAM column in a FileTable.

Error: 33420, Severity: 16, Unable to process object ‘%.*s’ because it is a three-part or four-part name. Specifying the server or database is not supported in the object identifer.
Error: 33421, Severity: 16, The object name ‘%.*s’ is not a valid FileTable object.
Error: 33422, Severity: 16, The column ‘%.*s’ cannot be added to table ‘%.*s’ as it is a FileTable. Adding columns to the fixed schema of a FileTable object is not permitted.
Error: 33423, Severity: 16, Invalid FileTable path name or format.
Error: 33424, Severity: 16, Invalid computer host name in the FileTable path.

Error: 33425, Severity: 16, Invalid share name in the FileTable path.
Error: 33426, Severity: 16, INSERT, UPDATE, DELETE, or MERGE to FileTable ‘%.*ls’ is not allowed inside a trigger on a FileTable.
Error: 33427, Severity: 16, Function %ls is not allowed on the deleted table inside a trigger.
Error: 33428, Severity: 14, User does not have permission to kill non-transacted FILESTREAM handles in database ID %d.
Error: 33429, Severity: 16, The non-transacted FILESTREAM handle %d does not exist.
Error: 33430, Severity: 10, Killed %d non-transactional FILESTREAM handles from database ID %d.
Error: 33431, Severity: 16, An invalid path locator caused a FileTable check constraint error. The path locator has a length of %d, which is longer than the limit of %d allowed for depth %d. Reduce the length of the path locator.
Error: 33433, Severity: 10, Unable to perform the Filetable lost update recovery for database id %d.

Error: 33434, Severity: 16, The current state of the database ‘%.*s’ is not compatible with the specified FILESTREAM non-transacted access level. The database may be read only, single user or set to emergency state.
Error: 33435, Severity: 16, Cannot publish the FileTable ‘%ls’ for replication. Replication is not supported for FileTable objects.
Error: 33436, Severity: 16, Cannot enable Change Data Capture on the FileTable ‘%ls’. Change Data Capture is not supported for FileTable objects.
Error: 33437, Severity: 16, Cannot publish the logbased view ‘%ls’ for replication. Replication is not supported for logbased views that depend on FileTable objects.
Error: 33438, Severity: 16, Cannot enable Change Tracking on the FileTable ‘%.*ls’. Change Tracking is not supported for FileTable objects.
Error: 33439, Severity: 16, Cannot use IGNORE_CONSTRAINTS hint when inserting into FileTable ‘%.*ls’, unless FILETABLE_NAMESPACE is disabled.

This is applicable on below versions of SQL Server

SQL Server 2005
SQL Server 2008 R2
SQL Server 2012
SQL Server 2014

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about SQL Server Conferences and Events, SQL Server Frequently asked questions, SQL Server Trainings.

 

SQL Server Errors or Failures from Error: 13227 to Error: 13268

SQLServerF1

 

Error: 13227, Severity: 10, to
Error: 13228, Severity: 10, from
Error: 13229, Severity: 10, enable
Error: 13230, Severity: 10, disable
Error: 13231, Severity: 10, remap

Error: 13232, Severity: 10, INSERT
Error: 13233, Severity: 10, UPDATE
Error: 13234, Severity: 10, DELETE
Error: 13235, Severity: 10, WHEN MATCHED
Error: 13236, Severity: 10, WHEN NOT MATCHED
Error: 13237, Severity: 10, WHEN NOT MATCHED BY SOURCE
Error: 13238, Severity: 10, TOP or OFFSET
Error: 13239, Severity: 10, GROUP BY
Error: 13240, Severity: 10, HAVING

Error: 13241, Severity: 10, ORDER BY
Error: 13243, Severity: 10, OUTPUT INTO
Error: 13244, Severity: 10, SELECT
Error: 13245, Severity: 10, WHERE
Error: 13246, Severity: 10, unexpected
Error: 13247, Severity: 10, The crypto API has detected bad data while trying to perform a decryption operation
Error: 13248, Severity: 10, OUTPUT
Error: 13249, Severity: 10, Temporary tables
Error: 13250, Severity: 10, Labels
Error: 13251, Severity: 10, availability group
Error: 13252, Severity: 10, type table
Error: 13254, Severity: 10, event
Error: 13255, Severity: 10, target
Error: 13256, Severity: 10, event action
Error: 13257, Severity: 10, event session
Error: 13258, Severity: 10, event package
Error: 13259, Severity: 10, event object
Error: 13260, Severity: 10, event predicate comparator
Error: 13261, Severity: 10, event attribute or predicate source
Error: 13262, Severity: 10, customizable attribute
Error: 13263, Severity: 10, event predicate
Error: 13264, Severity: 10, predicate source
Error: 13265, Severity: 10, event attribute
Error: 13266, Severity: 10, partitioned
Error: 13267, Severity: 10, not partitioned
Error: 13268, Severity: 10, resource pool

This is applicable on below versions of SQL Server

SQL Server 2005
SQL Server 2008 R2
SQL Server 2012
SQL Server 2014

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about SQL Server Conferences and Events, SQL Server Frequently asked questions, SQL Server Trainings.