CPU or Processor Speed Slowdown Errors in Windows Eventlogs

SQLServerF1

You may receive or notice below warning message in Windows System logs periodically.
Source: Microsoft-Windows-Kernel-Processor-Power
Event ID: 37
Task Category: (7)
Level: Warning
User: SYSTEM
Computer: ServerName
Description:
The speed of processor # in group # is being limited by system firmware. The processor has been in this reduced performance state for ## seconds since the last report.”

Starting with Windows Server 2008 R2, CPU power plan has been introduced where we can set the CPU power plan to either balanced or high performance. Each of these power plan has its own advantages and disadvantages. Balanced power plan consumes less power, but when the system or server is very busy, the performance will not be so good. With High performance power plan, the power consumption would be high, but on busy systems it dramatically improves the performance. So, on critical and important busy systems, it is advisable to use high performance CPU power plan. Also, in cases where you notices errors or warnings in event logs as mentioned above, go ahead and enable the high performance CPU power plan.

You can enabled this feature from control panel to either high performance or balanced power plan, but on some systems this may also have been enabled at BIOS level, so you will have to make changes both at control panel and BIOS level. Also on VMware or hyper-v or other virtual systems, it is required that this power plan is set to high performance on both guest and host servers or systems and also at BIOS level on the host server.

Below are the steps to change CPU power plan setting to High performance mode
– Open control panel and check the Power Options. Change or Make sure that the CPU Power Scheme is set to High Performance, and check that every option is set to “Always On”.
– Make sure latest drivers and firmware are installed on the server, especially for your motherboard and CPU.
– Reboot the server or system and go to your BIOS settings. Make sure that your power settings are set to maximum. This may differ from server to server.

Hope this was helpful.

This is applicable for below versions of Windows Servers

Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about SQL Server Conferences and Events, Frequently asked questions, SQL Server Trainings

 

Microsoft Windows Azure Error Codes from HTTP status code 409 to 412

SQLServerF1

Windows Azure Error code: LeaseIsBreakingAndCannotBeAcquired
Windows Azure HTTP status code: Conflict (409)
The lease ID matched, but the lease is currently in breaking state and cannot be acquired until it is broken.
Windows Azure Error code: LeaseIsBreakingAndCannotBeChanged
Windows Azure HTTP status code: Conflict (409)
The lease ID matched, but the lease is currently in breaking state and cannot be changed.
Windows Azure Error code: InfiniteLeaseDurationRequired
Windows Azure HTTP status code: Precondition Failed (412)
The lease ID matched, but the specified lease must be an infinite-duration lease.
Windows Azure Error code: SnapshotsPresent

Windows Azure HTTP status code: Conflict (409)
This operation is not permitted because the blob has snapshots.
Windows Azure Error code: InvalidBlobType
Windows Azure HTTP status code: Conflict (409)
The blob type is invalid for this operation.
Windows Azure Error code: InvalidVersionForPageBlobOperation
Windows Azure HTTP status code: Bad Request (400)
All operations on page blobs require at least version 2009-09-19.
Windows Azure Error code: InvalidPageRange

Windows Azure HTTP status code: Requested Range Not Satisfiable (416)
The page range specified is invalid.
Windows Azure Error code: SequenceNumberConditionNotMet
Windows Azure HTTP status code: Precondition Failed (412)
The sequence number condition specified was not met.
Windows Azure Error code: SequenceNumberIncrementTooLarge
Windows Azure HTTP status code: Conflict (409)
The sequence number increment cannot be performed because it would result in overflow of the sequence number.
Windows Azure Error code: SourceConditionNotMet
Windows Azure HTTP status code: Precondition Failed (412)
The source condition specified using HTTP conditional header(s) is not met.

Above are list of Microsoft Windows Azure Status and BLOB service Error Codes and Error Messages or Warning messages from HTTP status code 409 to 412 received while performing certain operation against Microsoft Windows Azure or related products.

What are Microsoft Windows Azure General Error Messages?

Microsoft Windows Azure is Microsoft’s operating system for cloud computing, which is intended to simplify IT management and minimize up-front and ongoing expenses. Microsoft Windows Azure cloud platform is ranked by Gartner as an industry leader for both infrastructure-as-a-service (IaaS) and platform-as-a-service (PaaS). This powerful combination of managed and unmanaged services lets you build, deploy and manage applications any way you like for unmatched productivity.

There may be errors received while using Microsoft Windows Azure which include errors like Common REST API Error Codes, Blob Service Error Codes, Queue Service Error Codes, Table Service Error Codes, File Service Error Codes, etc.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Microsoft Windows Azure Error Messages or Warning Messages on Windows Azure Operating Systems.

 

Microsoft Windows Azure Error Codes from HTTP status code 412 to 409

SQLServerF1

Windows Azure Error code: LeaseNotPresentWithContainerOperation
Windows Azure HTTP status code: Precondition Failed (412)
There is currently no lease on the container.
Windows Azure Error code: LeaseLost
Windows Azure HTTP status code: Precondition Failed (412)
A lease ID was specified, but the lease for the blob/container has expired.
Windows Azure Error code: LeaseIdMismatchWithBlobOperation
Windows Azure HTTP status code: Precondition Failed (412)
The lease ID specified did not match the lease ID for the blob.
Windows Azure Error code: LeaseIdMismatchWithContainerOperation

Windows Azure HTTP status code: Precondition Failed (412)
The lease ID specified did not match the lease ID for the container.
Windows Azure Error code: LeaseIdMissing
Windows Azure HTTP status code: Precondition Failed (412)
There is currently a lease on the blob/container and no lease ID was specified in the request.
Windows Azure Error code: LeaseNotPresentWithLeaseOperation
Windows Azure HTTP status code: Conflict (409)
There is currently no lease on the blob/container.
Windows Azure Error code: LeaseIdMismatchWithLeaseOperation

Windows Azure HTTP status code: Conflict (409)
The lease ID specified did not match the lease ID for the blob/container.
Windows Azure Error code: LeaseAlreadyPresent
Windows Azure HTTP status code: Conflict (409)
There is already a lease present.
Windows Azure Error code: LeaseAlreadyBroken
Windows Azure HTTP status code: Conflict (409)
The lease has already been broken and cannot be broken again.
Windows Azure Error code: LeaseIsBrokenAndCannotBeRenewed
Windows Azure HTTP status code: Conflict (409)
The lease ID matched, but the lease has been broken explicitly and cannot be renewed.

Above are list of Microsoft Windows Azure Status and Blob Service Error Codes and Error Messages or Warning messages from HTTP status code 412 to 409 received while performing certain operation against Microsoft Windows Azure or related products.

What are Microsoft Windows Azure General Error Messages?

Microsoft Windows Azure is Microsoft’s operating system for cloud computing, which is intended to simplify IT management and minimize up-front and ongoing expenses. Microsoft Windows Azure cloud platform is ranked by Gartner as an industry leader for both infrastructure-as-a-service (IaaS) and platform-as-a-service (PaaS). This powerful combination of managed and unmanaged services lets you build, deploy and manage applications any way you like for unmatched productivity.

There may be errors received while using Microsoft Windows Azure which include errors like Common REST API Error Codes, Blob Service Error Codes, Queue Service Error Codes, Table Service Error Codes, File Service Error Codes, etc.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Microsoft Windows Azure Error Messages or Warning Messages on Windows Azure Operating Systems.

 

Microsoft Windows Azure Error Codes from HTTP status code 400 to 412

SQLServerF1

Windows Azure Error code: InvalidBlobOrBlock
Windows Azure HTTP status code: Bad Request (400)
The specified blob or block content is invalid.
Windows Azure Error code: InvalidBlockId
Windows Azure HTTP status code: Bad Request (400)
The specified block ID is invalid. The block ID must be Base64-encoded.
Windows Azure Error code: InvalidBlockList
Windows Azure HTTP status code: Bad Request (400)
The specified block list is invalid.
Windows Azure Error code: ContainerNotFound

Windows Azure HTTP status code: Not Found (404)
The specified container does not exist.
Windows Azure Error code: BlobNotFound
Windows Azure HTTP status code: Not Found (404)
The specified blob does not exist.
Windows Azure Error code: ContainerAlreadyExists
Windows Azure HTTP status code: Conflict (409)
The specified container already exists.
Windows Azure Error code: ContainerDisabled

Windows Azure HTTP status code: Conflict (409)
The specified container has been disabled by the administrator.
Windows Azure Error code: ContainerBeingDeleted
Windows Azure HTTP status code: Conflict (409)
The specified container is being deleted.
Windows Azure Error code: BlobAlreadyExists
Windows Azure HTTP status code: Conflict (409)
The specified blob already exists.
Windows Azure Error code: LeaseNotPresentWithBlobOperation
Precondition Failed (412)
There is currently no lease on the blob.

Above are list of Microsoft Windows Azure Status and Blob Service Error Codes and Error Messages or Warning messages from HTTP status code 400 to 412 received while performing certain operation against Microsoft Windows Azure or related products.

What are Microsoft Windows Azure General Error Messages?

Microsoft Windows Azure is Microsoft’s operating system for cloud computing, which is intended to simplify IT management and minimize up-front and ongoing expenses. Microsoft Windows Azure cloud platform is ranked by Gartner as an industry leader for both infrastructure-as-a-service (IaaS) and platform-as-a-service (PaaS). This powerful combination of managed and unmanaged services lets you build, deploy and manage applications any way you like for unmatched productivity.

There may be errors received while using Microsoft Windows Azure which include errors like Common REST API Error Codes, Blob Service Error Codes, Queue Service Error Codes, Table Service Error Codes, File Service Error Codes, etc.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Microsoft Windows Azure Error Messages or Warning Messages on Windows Azure Operating Systems.

 

Microsoft Windows Azure Error Codes from HTTP status code 416 to 503

SQLServerF1

Windows Azure Error code: InvalidRange
Windows Azure HTTP status code: Requested Range Not Satisfiable (416)
The range specified is invalid for the current size of the resource.
Windows Azure Error code: InternalError

Windows Azure HTTP status code: Internal Server Error (500)
The server encountered an internal error. Please retry the request.
Windows Azure Error code: OperationTimedOut

Windows Azure HTTP status code: Internal Server Error (500)
The operation could not be completed within the permitted time.
Windows Azure Error code: ServerBusy
Windows Azure HTTP status code: Service Unavailable (503)
The server is currently unable to receive requests. Please retry your request.

Above are list of Microsoft Windows Azure Status and Error Codes and Error Messages or Warning messages from HTTP status code 416 to 503 received while performing certain operation against Microsoft Windows Azure or related products.

What are Microsoft Windows Azure General Error Messages?

Microsoft Windows Azure is Microsoft’s operating system for cloud computing, which is intended to simplify IT management and minimize up-front and ongoing expenses. Microsoft Windows Azure cloud platform is ranked by Gartner as an industry leader for both infrastructure-as-a-service (IaaS) and platform-as-a-service (PaaS). This powerful combination of managed and unmanaged services lets you build, deploy and manage applications any way you like for unmatched productivity.

There may be errors received while using Microsoft Windows Azure which include errors like Common REST API Error Codes, Blob Service Error Codes, Queue Service Error Codes, Table Service Error Codes, File Service Error Codes, etc.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Microsoft Windows Azure Error Messages or Warning Messages on Windows Azure Operating Systems.

 

Microsoft Windows Azure Error Codes from HTTP status code 304 to 400

SQLServerF1

Windows Azure Error code: ConditionNotMet
Windows Azure HTTP status code: Not Modified (304)
Windows Azure Error message: The condition specified in the conditional header(s) was not met for a read operation.
Windows Azure Error code: MissingRequiredHeader
Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: A required HTTP header was not specified.
Windows Azure Error code: MissingRequiredXmlNode
Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: A required XML node was not specified in the request body.
Windows Azure Error code: UnsupportedHeader

Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: One of the HTTP headers specified in the request is not supported.
Windows Azure Error code: UnsupportedXmlNode
Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: One of the XML nodes specified in the request body is not supported.
Windows Azure Error code: InvalidHeaderValue
Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: The value provided for one of the HTTP headers was not in the correct format.
Windows Azure Error code: InvalidXmlNodeValue

Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: The value provided for one of the XML nodes in the request body was not in the correct format.
Windows Azure Error code: MissingRequiredQueryParameter
Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: A required query parameter was not specified for this request.
Windows Azure Error code: UnsupportedQueryParameter
Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: One of the query parameters specified in the request URI is not supported.
Windows Azure Error code: InvalidQueryParameterValue
Windows Azure HTTP status code: Bad Request (400)
Windows Azure Error message: An invalid value was specified for one of the query parameters in the request URI.

Above are list of Microsoft Windows Azure Status and Error Codes and Error Messages or Warning messages from HTTP status code 304 to 400 received while performing certain operation against Microsoft Windows Azure or related products.

What are Microsoft Windows Azure General Error Messages?

Microsoft Windows Azure is Microsoft’s operating system for cloud computing, which is intended to simplify IT management and minimize up-front and ongoing expenses. Microsoft Windows Azure cloud platform is ranked by Gartner as an industry leader for both infrastructure-as-a-service (IaaS) and platform-as-a-service (PaaS). This powerful combination of managed and unmanaged services lets you build, deploy and manage applications any way you like for unmatched productivity.

There may be errors received while using Microsoft Windows Azure which include errors like Common REST API Error Codes, Blob Service Error Codes, Queue Service Error Codes, Table Service Error Codes, File Service Error Codes, etc.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Microsoft Windows Azure Error Messages or Warning Messages on Windows Azure Operating Systems.

 
1 2 3 4