Informix Error Messages and Error Codes From Error 16394 to 16400

SQLServerF1

Informix Error Code -16394 Cannot access the help messages.
The Debugger help messages are in the file fgldb.iem. The INSTALL program copies this file into the msg directory to which the INFORMIXDIR environment variable points. Probably the file was damaged, deleted, or read protected. Ask the system administrator to restore your access to it.
Informix Error Code -16395 Cannot compare BLOBs to any other value.
You asked the Debugger to compare a TEXT or BYTE variable in an expression. You cannot use variables of these types for comparisons. (However, you can refer to a substring of a TEXT variable.)

Informix Error Code -16396 Cannot use BLOBs in this expression.
You asked the Debugger to use a TEXT or BYTE variable in an expression. Variables of these types can be displayed only with PRINT or DUMP, or assigned null values with LET.
Informix Error Code -16397 Can print only BLOB variables with program =.
The PROGRAM = clause of the PRINT statement is used to specify an external program (for instance, a text editor) that can display the contents of a BYTE or TEXT value. The clause is not relevant with any other type of data.

Informix Error Code -16398 Illegal BLOB file name. Null name not permitted.
The 4GL LOCATE statement has located the BYTE or TEXT variable in a file. However, the filename for the variable is a null string. Because the file does not exist, the Debugger cannot do anything with it.
Informix Error Code -16399 No program name specified.
The PROGRAM = clause of the PRINT statement is used to specify an external program (for instance, a text editor) that can display the contents of a BYTE or TEXT value. In this command, the keyword was specified, but no program name followed it.
Informix Error Code -16400 Bad file name name.
The filename that is shown is not appropriate for its intended use. It is too long, contains improper special characters, or is null. Enter an appropriate filename.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16389 to 16393

SQLServerF1

Informix Error Code -16389 File name exceeds maximum length.
A filename cannot exceed 80 characters. If the name exceeds this length (if the message is not the result of some mistake in punctuation), you must rename it before you use it with the Debugger.
Informix Error Code -16390 Error occurred while reading file filename.
The Debugger encountered an error while it was trying to read a 4GL source file. Look for other messages (from the operating system, for example) that provide more details about the failure. Check that the file exists and that you have read permission.

Informix Error Code -16391 Internal error – attempt to highlight invalid line number.
Repeat the command. If the error recurs, please note all circumstances, and contact Informix Technical Support.
Informix Error Code -16392 No database name specified.
The database command requires the name of a database as its argument.
Informix Error Code -16393 Expression or variable contains invalid substring.
The Debugger cannot interpret a reference to a substring of a character value. Two numbers in square brackets specify a substring, as in the following expression:

charvalue[n1,n2]
The name charvalue must be the CHAR(n) data type; n1 specifies the first character of the substring, and n2 specifies the last. This error message appears when n1 is larger than n, the length of the character value, or when n1 is greater than n2.
Informix Error Code-16394 Cannot access the help messages.
The Debugger help messages are in the file fgldb.iem. The INSTALL program copies this file into the msg directory to which the INFORMIXDIR environment variable points. Probably the file was damaged, deleted, or read protected. Ask the system administrator to restore your access to it.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16384 to 16388

SQLServerF1

Informix Error Code -16384 Line in .4db file exceeds maximum length.
You cannot have more than 256 characters in a single Debugger command line. If you are using semicolon (;) command separators, break the line into separate commands.
Avoid Debugger commands that have more characters in a single line than your screen or list device can display. Use the backslash continuation symbol to divide long command lines into shorter segments, or use aliases.

Informix Error Code -16385 Call to function function-name failed.
The logic in your 4GL or C language function might be defective or might not support the argument list that you specified in a CALL command. Use the VIEW command to examine the source code of a 4GL function. Use the Escape feature to examine the source file of a C function.

Informix Error Code -16386 Search string exceeds maximum length.
The maximum length of a search pattern specification whose first character is a quote (“) is 80 characters. The maximum length is 50 after any other first character. Check if you unintentionally pressed a Search command key (? or /). Repeat the Search command, but specify a shorter pattern.
Informix Error Code -16387 Program is not currently being executed.
A WHERE command cannot display your active functions until after execution begins. Invoke the RUN or CALL command to begin execution, and then repeat the command. (You might first have to set a breakpoint to suspend execution before normal termination.) See the topic “Active Functions and Variables” in the Debugger manual.
Informix Error Code -16388 Cannot create Debugger window.
You are probably out of memory. Take whatever steps your operating system permits to increase the amount of available memory.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16377 to 16383

SQLServerF1

Informix Error Code -16377 Cannot retrieve values of global variables before execution begins.
A PRINT command cannot display the value of a global program variable until after execution begins. Invoke the RUN or CALL command to begin execution and then repeat the PRINT command. In this situation, you can specify constants or the names of global variables as arguments of CALL. (You might have to set a breakpoint or press the Interrupt key to suspend the program before normal termination.)
Informix Error Code -16378 A small positive integer is expected.
You cannot enter a TIMEDELAY command without an argument, or with a negative number as the argument. Repeat the command, specifying zero or a positive integer as the number of seconds delay in the Source window or Command window.

Informix Error Code -16381 Cannot set breakpoint or tracepoint – no current module.
You cannot set a breakpoint or tracepoint without referencing a module or function unless a program module is in the Source window. You probably ignored an error message that appeared when you were unable to load a 4GL source file.

Informix Error Code -16382 Command file filename is currently being processed.
You used a READ command, either nested in an initialization file or in the input file of another READ command, that refers to one of the following:
To itself
To a previous READ command input file
To a .4db initialization file that has not yet completed execution
You cannot execute a READ command that might create an infinite loop.
Informix Error Code -16383 Number of nested read commands limit exceeded.
You started a READ command that invoked another, which invoked another, and so on for more than ten nested READ commands. You must simplify your arrangement of .4db command files.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16371to 16376

SQLServerF1

Informix Error Code -16371 Read file not specified.
You must specify the name of a .4db file in a READ command.
Informix Error Code -16372 Variable or expression expected.
You must identify what you want the Debugger to display in a PRINT command. Repeat the command, specifying the name of a variable, record or array, or an expression.

Informix Error Code -16373 Cannot print or make assignments before execution has started.
You cannot use a LET command to assign a value to a variable, or a DUMP or PRINT command to display information about a variable or function until after execution starts. The same restriction applies after execution has terminated normally or after a CLEANUP command. Invoke the RUN or CALL command to begin execution and then repeat the command. (You might have to set a breakpoint or, in UNIX, press the Interrupt key to prevent normal termination.)

Informix Error Code -16374 Break command contains ‘if’ without having a condition specified.
An expression must follow the IF keyword in a BREAK command. The breakpoint has no effect while the condition is false (zero). Repeat the command without IF, or with IF and a condition.
Informix Error Code -16375 Cannot view C-library function function-name.
The VIEW command cannot display the source code of C functions or ESQL/C functions. To examine C source code, you must use the Escape feature and use an operating-system command that displays the C source file.
Informix Error Code -16376 Break or trace name name does not begin with an alpha character.
The first character in the name of a breakpoint or of a tracepoint must be a letter. The subsequent characters can be letters, numbers, or underscores ( _ ). Single apostrophes ( ‘ ) or double-quote characters ( ” ) must enclose the name. Repeat the command, specifying a valid name enclosed in quotes.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16367 to 16370

SQLServerF1

Informix Error Code -16367 Need to specify a specific record member or array element.
You cannot use the name of an array as an argument of a CALL command. You cannot use the unqualified name of an array or record in an expression or as the object of a breakpoint or tracepoint. In all these cases, you must use a subscript in brackets to specify a particular array element, or the full name of a member of a record.

Informix Error Code -16368 Expression contains variables from different functions.
You cannot combine variables from different functions in the same expression. If you need to know the value of such an expression, you must use PRINT to evaluate the variables from each function separately. Then enter these values as constants in the BREAK, LET, or PRINT command in place of the names of the variables.

Informix Error Code -16369 Cannot initialize application device device-name.
You must specify the name of another terminal that has the same termcap or terminfo entries as the terminal from which you invoked the Debugger. The second terminal must be logged in under your account name.
Informix Error Code -16370 No application device specified.
You must specify the name of another terminal that has the same termcap or terminfo entries as the terminal from which you invoked the Debugger. (However, it cannot be the name of the device from which you invoked the Debugger.) Enter tty from the terminal that you want to use as your application device. Its screen will display its terminal pathname. Repeat the APPLICATION DEVICE command, specifying an appropriate terminal device name.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16362 to 16366

SQLServerF1

Informix Error Code -16362 No current function.
No current 4GL function exists if you have not yet invoked a RUN or CALL command. Even after RUN or CALL, no current function exists if execution terminated normally, rather than being stopped by a breakpoint, by an Interrupt or STEP command, or by a fatal error. Use RUN or CALL to begin or restart program execution.

Informix Error Code -16363 Variable in function function-name is not active.
You named a variable whose value is assigned by a function that has not yet been called or by a function that has already returned. A LET or PRINT command can refer to only an active variable; that is, one global or assigned in a function that is currently executing (a function that a WHERE command lists). When you enter a CALL command, you must substitute a literal value for an expression that needs an inactive variable.

Informix Error Code -16364 Unknown option option.
The Debugger cannot identify an argument option in your command. Repeat the command, specifying option differently. Enter help turn to display the many options of TURN.
Informix Error Code -16365 Breakpoint or tracepoint name is already active.
The ENABLE command has no effect on breakpoints or tracepoints that are already enabled. Check that you entered the name or reference number that you intended. If you did, and you still feel that name should have been inactive, use list break trace or search the command buffer to see if a previous DISABLE command deactivated the wrong breakpoint or tracepoint.
Informix Error Code -16366 Error occurred while trying to write to a file.
Either your file system is full, or a hardware error occurred. Use the Escape feature to display the space that remains on your current drive.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16356 to 16361

SQLServerF1

Informix Error Code -16356 Too many parameters passed to function function-name.
Your argument list in a CALL command includes more parameters than the function is defined as receiving. If you are not sure how many parameters should be passed to the function, you can use a VIEW command to display the source code of the function.
Informix Error Code -16357 Function function-name is not active.
You can display only variables that are defined in the active function. This variable is defined in function name, which is not active.

Informix Error Code -16358 Variable name expected.
A LET command requires as its first argument a variable name. Do not put quotes around the name.
Informix Error Code -16359 Cannot assign values to records; Assignments must be to record members.
A LET command can assign a value to a simple variable or to a specific member of a record, but not to a whole record.

Informix Error Code -16360 Cannot assign values to arrays; Assignments must be to array elements.
A LET command can assign a value to a simple variable or to a single element of an array that a subscript in brackets designates. Enter help let to see an example.
Informix Error Code -16361 Invalid variable name variable-name.
The identifier variable-name is not the name of a variable. The VARIABLE command requires the name of a variable. Check the spelling of the name.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16352 to 16355

SQLServerF1

Informix Error Code -16352 File filename has been modified. (.4gl is newer than .4go).
The Debugger executes the .4go module, but it displays lines from the .4gl source file. Because the source file has been changed since the module was compiled, the lines that the Source window displays might not correspond to the statements in the compiled program.
If you change the source code in a .4gl file, you must recompile it. If your program includes several modules, you must also concatenate the compiled modules before you start debugging. Also check if files exist with both the .4go and .4gi suffixes for this program. Even if your .4go file is the appropriate recompiled version, the Debugger first attempts to interpret the .4gi version.

Informix Error Code -16353 Executable command is invalid when executing tracepoint commands.
The list of command lines in your TRACE command includes a CALL, CONTINUE, RUN, or STEP command. These commands are not supported within a TRACE command.

Informix Error Code -16354 Function function-name not found.
You specified a function that is not part of the current 4GL program. Check if you have misspelled the name or if you are confusing the names of functions from different programs. Make sure that your 4GL source code defines and calls the function that you want to execute.
Informix Error Code -16355 Function function-name requires parameters.
The function that the CALL command names is defined as taking one or more parameters. You must enter a matching number of parameters in the parentheses following the name of the function. If you are not sure what parameters should be passed to the function, use a VIEW command to display its source code.

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 

Informix Error Messages and Error Codes From Error 16347 to 16351

SQLServerF1

Informix Error Code -16347 Invalid breakpoint or tracepoint number name specified.
You cannot specify a reference number in an ENABLE, DISABLE, NOBREAK, or NOTRACE command with a zero or negative value, or a value for which no corresponding breakpoint or tracepoint currently exists. You can enter list break trace to display your current reference numbers.

Informix Error Code -16348 Breakpoint or tracepoint name is not active.
You asked the DISABLE command to deactivate a breakpoint that is already disabled. Check that you named the breakpoint that you intended. You can enter list break trace to display your current breakpoints and tracepoints.
Informix Error Code -16349 Use nobreak for breakpoints and notrace for tracepoints.
You specified a breakpoint to the NOTRACE command or a tracepoint to the NOBREAK command. Each command can deal only with its own objects.

Informix Error Code -16350 Breakpoint/tracepoint already disabled/enabled or can’t be determined.
The Debugger cannot find a corresponding breakpoint or tracepoint on which to carry out your ENABLE or DISABLE command. You can enter list break trace to display all your current reference points.
Informix Error Code -16351 Variable variable-name could not be located.
The Debugger cannot reference a variable unless it is defined in a 4GL module. For 4GL variables, check that you entered the variable name correctly. If the variable is not in the current function or module, you must qualify its name. See the section on “Scope of Reference” in the Debugger manual. (This message can appear if you enter what you intend to be a module name in a BREAK or TRACE command, but you omit the dot at the end of the name.)

Above are list of Informix Error Messages and Errors Codes or Status Codes or Exit Codes along with Error and Warning messages received while performing certain operation against Informix applications or related products.

What are Informix Error Messages?
All Informix messages returned by the Informix server are assigned an error code.

In general, each Informix error contains the following information:
• The Informix Error Code or Informix Error status
• The message text. This text is usually returned with the Error code. Some messages employ word substitution, where the word substituted represents the system-replacement of a term more specific to the occurrence.
• An explanation of how the error may have occurred.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informix Error Codes or Status Codes or Exit Codes and Error Messages on Windows, Linux Operating Systems.

 
1 2 3 17