Oracle Database Errors or Warnings from Error ORA-27417 to ORA-27452

SQLServerF1

ORA-27417: BYWEEKNO clause is only supported when FREQ=YEARLY
Cause: A repeat interval or calendar contained a BYWEEKNO clause with a frequency other than yearly.
Action: Remove the BYWEEKNO clause or change the frequency to yearly.
ORA-27418: syntax error in repeat interval or calendar
Cause: The repeat interval or calendar definition could not be recognized as a valid syntax.
Action: Specify a valid repeat interval.
ORA-27419: unable to determine valid execution date from repeat interval
Cause: The specified repeat interval contained conflicting clauses that made it impossible to ever find a matching date, e.g., ‘FREQ=YEARLY;BYMONTH=FEB;BYMONTHDAY=31’. Alternatively, the scheduler reached its maximum number of attempts to try to find a valid execution date. This occurs when theoretically there is a valid execution date far in the future, but the scheduler took too many attempts to determine this date.
Action: Remove the conflicting clauses, or simplify the repeat interval so that it is easier to determine the next execution date.

ORA-27421: usage of string not supported in a calendar definition
Cause: The calendar definition contained a clause that is specific for a repeat interval
Action: Specify a valid calendar definition.
ORA-27431: chain string.string has a user-managed rule set
Cause: An attempt was made to modify a rule set that is not managed by the Scheduler.
Action: Modify the rule set directly using the dbms_rule_adm package or create another chain without specifying a rule set.
ORA-27432: step string does not exist for chain string.string
Cause: The step specified does not exist for the given chain.
Action: Reissue the command using a step that exists for this chain.

ORA-27433: cannot alter state of step string for job string.string to string
Cause: The step cannot be changed to the requested state. The state of a running step cannot be changed. A step which is running or has already run cannot be run again.
Action: Wait until the step has finished running.
ORA-27434: cannot alter chain step job string.string.string
Cause: A step job of a running chain cannot be altered, only stopped or dropped.
Action: Stop or drop the chain step job or alter the running chain step instead.
ORA-27435: chain job terminated abnormally
Cause: A chain job has ended abnormally. The error code for the running chain could not be retrieved.
Action: No action necessary. The job will run again when it is scheduled to.
ORA-27451: string cannot be NULL
Cause: An attempt was made to set a NOT NULL scheduler attribute to NULL.
Action: Reissue the command using a non-NULL value for the specified attribute.
ORA-27452: string is an invalid name for a database object.
Cause: An invalid name was used to identify a database object.
Action: Reissue the command using a valid name.

Above are list of Oracle Database Errors or Warnings from Error ORA-27417 to ORA-27452 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27377 to ORA-27416

SQLServerF1

ORA-27377: windows cannot have event based schedules
Cause: Event based schedules for windows are currently not supported.
Action: Use a time-based schedule instead.
ORA-27378: cannot stop jobs of type EXECUTABLE on this platform
Cause: An attempt was made to stop a job of type EXECUTABLE on a platform where the stop operation was not supported.
Action: If the attempt to stop the job was made with the FORCE option set to FALSE, try again but change the FORCE option to TRUE.
ORA-27379: INSTANCE_ID attribute conflicts with job class settings
Cause: The value of the INSTANCE_ID attribute of the job conflicted with the value of the SERVICE attribute of its job class.
Action: Change the value of the INSTANCE_ID attribute or place the job in a job class whose settings do not conflict with the INSTANCE_ID attribute. Then re-enable the job.

ORA-27399: job type EXECUTABLE requires the CREATE EXTERNAL JOB privilege
Cause: The owner of a job of type EXECUTABLE does not have the CREATE EXTERNAL JOB system privilege.
Action: Grant the CREATE EXTERNAL JOB system privilege to the job owner or create another job in a schema which does have the CREATE EXTERNAL JOB system privilege.
ORA-27411: empty string is not a valid repeat interval.
Cause: An empty string ” was provided as a repeat interval for a window or a schedule.
Action: Specify a valid repeat interval, e.g., ‘FREQ=DAILY;BYHOUR=8;BYMINUTE=0;BYSECOND=0’ for a job that executes daily at 8am.
ORA-27412: repeat interval or calendar contains invalid identifier: string
Cause: The calendar string or calendar definition for the repeat interval of a job, schedule or window contained an unsupported keyword or reference to an undefined calendar.
Action: Correct the repeat interval such that it no longer contains the invalid keyword.

ORA-27413: repeat interval is too long
Cause: The repeat interval consisted of a calendar string larger than the maximum size allowed.
Action: Use a shorter calendar string for the repeat interval.
ORA-27414: Invalid BY value type
Cause: The type of BY value was not allowed for the frequency specified
Action: Ommit BY values of this type or alter the frequency
ORA-27415: repeat interval or calendar must start with the FREQ= clause
Cause: The specified calendar string for the repeat interval did not start with the frequency clause.
Action: Create a repeat interval that starts with a frequency clause, e.g. ‘FREQ=YEARLY;BYMONTH=FEB’
ORA-27416: BYDAY= clause in repeat interval or calendar contains an invalid weekday
Cause: The BYDAY clause of the repeat interval contained a value that doesn’t properly represent a weekday.
Action: Use the correct three letter abbreviations for weekdays, e.g. MON for Monday and FRI for Friday.

Above are list of Oracle Database Errors or Warnings from Error ORA-27377 to ORA-27416 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27366 to ORA-27376

SQLServerF1

ORA-27366: job “string.string” is not running
Cause: An attempt was made to stop a job that was not running.
Action: Verify the status of the job. If the job is running but this message is still being returned, contact Oracle support.
ORA-27367: program “string.string” associated with this job is disabled
Cause: An attempt was made to run a job whose program has been disabled.
Action: Reenable the program before running the job.
ORA-27369: job of type EXECUTABLE failed with exit code: string
Cause: A problem was encountered while running a job of type EXECUTABLE. The cause of the actual problem is identified by the exit code.
Action: Correct the cause of the exit code and reschedule the job.

ORA-27370: job slave failed to launch a job of type EXECUTABLE
Cause: The scheduler ran into an error when the job slave tried to start a job of type EXECUTABLE. The rest of the error stack will provide more detailed information on what the exact problem was.
Action: Correct the problem specified in the error stack and reschedule the job.
ORA-27371: jobs of type EXECUTABLE are not supported on this platform
Cause: The user tried to create a job or program of type EXECUTABLE on a platform where such jobs are not supported.
Action: Switch to a different platform or create a different type of job or program.
ORA-27372: length of action and arguments exceeds platform limit string
Cause: The total length of the job or program action and the arguments exceeds the platform limit specified.
Action: Reduce the total length by specifying fewer and/or shorter arguments

ORA-27373: unknown or illegal event source queue
Cause: The source queue specified for the event based job or event based schedule was either not found or was of the wrong type.
Action: Check if the queue exists. If it does make sure it is a multiple consumer queue and it is a post 8.1 compatible queue. Single consumer queues and old-style queues cannot be used as event source queues.
ORA-27374: insufficient privileges on event source queue
Cause: The job owner had insufficient privileges on the event source queue that was specified for the job.
Action: The job owner has to have dequeue privileges on event source queue or he has to have manage queue or dequeue any queue system privileges. Make sure one of these privileges is granted.
ORA-27375: valid agent name must be specified for secure queues
Cause: The queue specified for the event based job or schedule was a secure queue and either no agent name was specified or an invalid agent name was specified.
Action: If no agent name was specified, retry the call with a valid agent name. If the agent name was valid, check if the agent is currently subscribed to the queue and, in the case of jobs, check is the agent has been authorized to act as the job owner.
ORA-27376: event condition cannot be NULL
Cause: A null event condition was passed in for an event based job or schedule. This is not allowed.
Action: Pass in a legal event condition.

Above are list of Oracle Database Errors or Warnings from Error ORA-27366 to ORA-27376 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27353 to ORA-27365

SQLServerF1

ORA-27353: job attribute string is missing
Cause: An attribute needed to fully specify a job was not passed in to a call to CREATE_JOBS or the JOB object constructor.
Action: Issue the call again with the required attribute set.
ORA-27354: attribute string cannot be set for lightweight jobs
Cause: The CREATE_JOBS call or the JOB object constructor was called with an argument that is illegal in the case of lightweight jobs.
Action: Set the argument to the default value and issue the call again.
ORA-27356: invalid job argument
Cause: An invalid job argument was passed into either the CREATE_JOBS call or the JOB object constructor.
Action: Correct the argument value and issue the call again.

ORA-27357: duplicate reference to job object string
Cause: The scheduler CREATE_JOBS call had two or more references to the same job.
Action: Eliminate the duplicate references and issue the call again.
ORA-27359: duplicate reference to attribute string of job string
Cause: The scheduler SET_JOB_ATTRIBUTES call had two or more references to a specific atrribute of a job.
Action: Eliminate the duplicate references and issue the call again.
ORA-27361: scheduler API invoked with illegal or inconsistent arguments
Cause: A DBMS_SCHEDULER API call was invoked with either illegal or inconsistent arguments.
Action: Refer to scheduler documentation for the call, make the necessary changes and issue the call again.

ORA-27362: batch API call completed with errors
Cause: Some of the commands submitted to a scheduler batch API call could not be successfully carried out because of errors. Other commands in the batch may have completed successfully.
Action: Check the view SCHEDULER_JOB_ERRORS to see which commands failed and why. Make the appropriate corrections and submit the failed commands again.
ORA-27363: invalid program for lightweight job
Cause: You tried to create a lightweight job using an invalid program. A program used in a lightweight job has to be enabled, has to be in the same schema as the job, and the program action has to be either a PL/SQL block or a stored procedure.
Action: Use a valid program for the lightweight job.
ORA-27364: remote database string already registered as string
Cause: The user attempted to register a remote database that was already registered.
Action: To update the registration information, the REPLACE argument of the REGISTER_REMOTE_DATABASE procedure should be set to TRUE. If the registration information is already current, no further action is needed.
ORA-27365: job has been notified to stop, but failed to do so immediately
Cause: The job specified in the stop_job command cannot be stopped immediately(because it is rolling back or blocked on a network operation), but it has been notified to stop. This means it will be stopped as soon as possible after its current uninterruptable operation is done.
Action: No action is required for the job to be stopped, but calling stop_job with force (if you have the privilege) may cause the job to be stopped sooner.

Above are list of Oracle Database Errors or Warnings from Error ORA-27353 to ORA-27365 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27215 to ORA-27351

SQLServerF1

ORA-27215: skgfgsmcs: sbtinfo2 returned unknown file
Cause: During an sbtinfo2() call, the media management software returned information about an unknown backup file.
Action: Contact the media management vendor.
ORA-27216: skgfgsmcs: sbtinfo2 returned a malformed response
Cause: The media management software returned a malformed response during an sbtinfo2() call.
Action: Contact the media management vendor.
ORA-27217: failed to load Media Management Library from secure location
Cause: SBT libraries were not installed in a secure location.
Action: Remove SBT_SECURE parameter or Request third party vendors to provide patch that installs SBT libraries in secured locations as mandated by Oracle.

ORA-27230: OS system call failure
Cause: OS system call failed
Action: check errno and contact Oracle support
ORA-27250: OS system call failure
Cause: OS system call failed
Action: check errno and contact Oracle support
ORA-27300: OS system dependent operation:string failed with status: string
Cause: OS system call error
Action: contact Oracle Support

ORA-27301: OS failure message: string
Cause: OS system call error
Action: contact Oracle Support
ORA-27302: failure occurred at: string
Cause: OS system call error
Action: contact Oracle Support
ORA-27303: additional information: string
Cause: OS system call error
Action: contact Oracle Support
ORA-27351: conflicting values of job attributes string and string
Cause: The values of two attributes passed in to the CREATE_JOBS call or the JOB object constructor conflicted with each other. This is usually because both attributes cannot be non-NULL at the same time.
Action: Resolve the conflict by changing the value of one of the attributes and issue the call again.

Above are list of Oracle Database Errors or Warnings from Error ORA-27215 to ORA-27351 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27205 to ORA-27214

SQLServerF1

ORA-27205: skgfpcn: sbtpccancel returned error
Cause: sbtpccancel returned an error. This happens during a proxy restore.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27206: requested file not found in media management catalog
Cause: A backup file used in a recovery manager catalog maintenance command was not found in the media management catalog.
Action: Retry the command with a different file.
ORA-27207: syntax error in device PARMS – parentheses mismatch or missing
Cause: User-supplied PARMS value has incorrect syntax.
Action: Retry the command with correct syntax: ENV=(..) BLKSIZE=nnnn

ORA-27208: syntax error in device PARMS – environment variable value missing
Cause: User-supplied PARMS value has incorrect syntax.
Action: Retry the command with correct syntax: ENV=(var1=val1,var2=val2,..)
ORA-27209: syntax error in device PARMS – unknown keyword or missing =
Cause: User-supplied PARMS value has incorrect syntax. The server expected to find ENV or BLKSIZE, but found an unknown keyword.
Action: Retry the command with correct syntax: ENV=(..) BLKSIZE=nnnn
ORA-27210: syntax error in device PARMS
Cause: User-supplied PARMS value has incorrect syntax.
Action: Retry the command with correct syntax: ENV=(..) BLKSIZE=nnnn

ORA-27211: Failed to load Media Management Library
Cause: User-supplied SBT_LIBRARY or libobk.so could not be loaded. Call to dlopen for media library returned error. See Additional information for error code.
Action: Retry the command with proper media library. Or re-install Media management module for Oracle.
ORA-27212: some entrypoints in Media Management Library are missing
Cause: media library does not have one of the following entrypoints : sbtinfo, sbtread, sbtwrite, sbtremove, sbtopen, sbtclose, sbtinit
Action: Retry the command with proper media library.
ORA-27213: failed to unload Media Management Library
Cause: dlclose for media library returned error. See Additional Additional information for error code.
Action: contact Oracle Support.
ORA-27214: skgfrsfe: file search failed
Cause: The FindNextFile function returned unxpected error.
Action: Check errors on the error stack for an explanation why the search for files could not be successfully executed.

Above are list of Oracle Database Errors or Warnings from Error ORA-27205 to ORA-27214 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27195 to ORA-27204

SQLServerF1

ORA-27195: proxy copy not supported
Cause: An attempt was made to do a proxy backup or restore, but the media management software installed with Oracle does not support proxy copy.
Action: Re-run the backup in non-proxy mode, or contact the media management vendor if the software is supposed to support proxy copy.
ORA-27196: skgfpbk: sbtpcbackup returned error
Cause: sbtpcbackup returned an error. This happens when a proxy backup is begun.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27197: skgfprs: sbtpcrestore returned error
Cause: sbtpcrestore returned an error. This happens when a proxy restore is begun.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.

ORA-27198: skgfpvl: sbtpcvalidate returned error
Cause: sbtpcvalidate returned an error. This happens during a proxy backup or restore.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27199: skgfpst: sbtpcstatus returned error
Cause: sbtpcstatus returned an error. This happens during a proxy backup or restore.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.

ORA-27200: skgfpgo: sbtpcstart returned error
Cause: sbtpcstart returned an error. This happens during a proxy backup or restore.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27201: skgfpcm: sbtpccommit returned error
Cause: sbtpccommit returned an error. This happens during a proxy backup or restore.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27202: skgfpen: sbtpcend returned error
Cause: sbtpcend returned an error. This happens during a proxy backup or restore.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27203: skgfpqb: sbtpcquerybackup returned error
Cause: sbtpcquerybackup returned an error. This happens during a proxy backup.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27204: skgfpqr: sbtpcqueryrestore returned error
Cause: sbtpcqueryrestore returned an error. This happens during a proxy restore.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.

Above are list of Oracle Database Errors or Warnings from Error ORA-27195 to ORA-27204 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27163 to ORA-27194

SQLServerF1

ORA-27163: out of memory
Cause: The program ran out of memory when allocating a temporary data structure.
Action: Increase the amount of memory on the system.
ORA-27164: tried to join detached thread
Cause: The program tried to join a detached thread.
Action: This is an internal error; contact Oracle support.
ORA-27165: tried to join thread that does not exist
Cause: The program tried to join a thread that does not exist.
Action: This is an internal error; contact Oracle support.

ORA-27166: tried to join current thread
Cause: A thread in the program tried to join itself.
Action: This is an internal error; contact Oracle support.
ORA-27167: Attempt to determine if Oracle binary image is stored on remote server failed
Cause: OS dependent operation failed
Action: None
ORA-27190: skgfrd: sbtread2 returned error
Cause: sbtread returned an error. This happens while reading a backup file during a restore operation.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.

ORA-27191: sbtinfo2 returned error
Cause: sbtinfo2 returned an error. This happens while retrieving backup file information from the media manager’s catalog.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27192: skgfcls: sbtclose2 returned error – failed to close file
Cause: sbtclose2 returned an error. This happens while closing a backup file during a backup or restore operation.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.
ORA-27193: sbtinfo2 did not return volume label
Cause: sbtinfo2 did not return the volume label information for the backup file that was just created.
Action: This is an internal error in the media management product. Contact the media management vendor.
ORA-27194: skgfdvcmd: sbtcommand returned error
Cause: sbtcommand returned an error. This happens when an rman SEND command is issued.
Action: This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.

Above are list of Oracle Database Errors or Warnings from Error ORA-27163 to ORA-27194 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27153 to ORA-27162

SQLServerF1

ORA-27153: wait operation failed
Cause: OS system called failed
Action: check errno contact Oracle Support
ORA-27154: post/wait create failed
Cause: internal error, multiple post/wait creates attempted simultaneously
Action: check errno and contact Oracle Support
ORA-27155: could not execute file
Cause: OS system call failed
Action: check errno and contact Oracle Support

ORA-27156: request for process information failed
Cause: internal error
Action: contact Oracle Support
ORA-27157: OS post/wait facility removed
Cause: the post/wait facility for which the calling process is awaiting
Action: check errno and contact Oracle Support
ORA-27158: process control failure
Cause: Oracle was unable to set the specified process control.
Action: Consult the Oracle Administrator’s Guide.

ORA-27159: failure setting process scheduling priority
Cause: Oracle was unable to set the scheduling priority desired.
Action: Consult the Oracle Administrator’s Guide.
ORA-27160: process requested to perform operation
Cause: The current process was requested to perform an operation by another process.
Action: This is used internally; no action is required.
ORA-27161: request for Oracle binary information failed
Cause: The program was unable to get information about the Oracle binary.
Action: Check for additional errors and contact Oracle support.
ORA-27162: thread creation failed
Cause: The program was unable to create a thread.
Action: Check errno and contact Oracle support.

Above are list of Oracle Database Errors or Warnings from Error ORA-27153 to ORA-27162 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-27143 to ORA-27152

SQLServerF1

ORA-27143: OS system call failure
Cause: OS system call failed
Action: check errno and contact Oracle support
ORA-27144: attempt to kill process failed
Cause: OS system call error
Action: check errno and contact Oracle Support
ORA-27145: insufficient resources for requested number of processes
Cause: OS system call error
Action: check errno and contact Oracle Support

ORA-27146: post/wait initialization failed
Cause: OS system call failed
Action: check errno and contact Oracle Support
ORA-27147: post/wait reset failed
Cause: OS system call failed
Action: check errno and contact Oracle Support
ORA-27148: spawn wait error
Cause: OS system call failed
Action: check errno and contact Oracle Support

ORA-27149: assignment out of range
Cause: internal error, requested conversion too large for type
Action: contact Oracle Support
ORA-27150: attempt to notify process of pending oradebug call failed
Cause: OS system call
Action: check errno contact Oracle Support
ORA-27151: buffer not large enough to hold process ID string
Cause: internal error
Action: contact Oracle Support
ORA-27152: attempt to post process failed
Cause: OS system call failed
Action: check errno and contact Oracle Support

Above are list of Oracle Database Errors or Warnings from Error ORA-27143 to ORA-27152 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database. Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 
1 2 3 9