Oracle Database Errors or Warnings from Error ORA-19591 to ORA-19600

SQLServerF1

ORA-19591: backup aborted because job time exceeded duration time
Cause: You tried to backup with duration option and the time provided was not sufficient to complete the backup.
Action: Adjust the duration time and re-run the command. Or run the backup command without duration option.
ORA-19592: wrong string conversation type
Cause: You attempted to specify a type of file to be backed-up or restored, but the current conversation cannot process this type of file. For example, you specified an archived log to be included in a datafile backup set. The specified file will not be included in the backup or restore operation.
Action: No action required – the conversation is still active, and more files can be specified.
ORA-19593: datafile number string already included as string
Cause: This datafile is already specified for inclusion in this backup or restore conversation. A backup or restore conversation may process only a single instance of a datafile.
Action: No action required – the conversation is still active, and more files can be specified.

ORA-19594: control file already included as string
Cause: The control file is already specified for inclusion in this backup or restore conversation. A backup or restore conversation may process only a single instance of the control file.
Action: No action required – the conversation is still active, and more files can be specified.
ORA-19595: archived log string already included in backup conversation
Cause: The indicated archived log has already been specified for inclusion in this backup conversation.
Action: No action required – the conversation is still active, and more files can be specified.
ORA-19596: SPFILE already included
Cause: The SPFILE is already specified for inclusion in this backup or restore conversation. A backup or restore conversation may process only a single instance of the SPFILE.
Action: No action required – the conversation is still active, and more files can be specified.

ORA-19597: file string block size string does not match set block size of string
Cause: A file was specified for inclusion in a backup set but it has a logical block size different from the rest of the files in the backup set. All files in a backup set must have the same logical block size.
Action: Specify a file that has the same block size as the rest of the files in the backup set. The conversation is still active and more files can be specified.
ORA-19598: can not backup SPFILE because the instance was not started with SPFILE
Cause: A backup command requested a backup of the SPFILE, but no SPFILE was used to startup the instance.
Action: Create an SPFILE and re-start the instance using the SPFILE.
ORA-19599: block number string is corrupt in string string
Cause: A corrupt block was found in a control file, archived log, or backup piece that is being read for a backup or copy. Corruption shall not be tolerated in control files, archived logs, or backup pieces.
Action: None. The copy or backup operation fails. Note that in the case of a backup set, the conversation is still active and the piece may be retried.
ORA-19600: input file is string string (string)
Cause: This message identifies the input file for a failed copy operation. Both the file number and name (if the name has been determined) are shown. For a datafile, the file number refers to the datafile’s absolute file number as shown in the DBA_DATA_FILES view. For a datafile copy, the file number refers to the copy’s control file record number as shown in the RECID column of the V$DATAFILE_COPY view. For an archived log, the file number refers to the log’s control file record number as shown in the RECID column of the V$ARCHIVED_LOG view.
Action: See other error message.

Above are list of Oracle Database Errors or Warnings from Error ORA-19591 to ORA-19600 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-19581 to ORA-19590

SQLServerF1

ORA-19581: no files have been named
Cause: An attempt was made to proceed from the file naming phase to the piece processing phase of a backup or restore conversation before any files have been specified for backup or restore.
Action: Specify some files then retry the operation.
ORA-19582: archived log file header validation for string failed
Cause: Archived log file header is corrupt and could not be validated.
Action: Provide a valid archived log file and retry the operation.
ORA-19583: conversation terminated due to error
Cause: An error occurred which forced the termination of the current backup or restore conversation.
Action: There should be other error messages to help identify the cause of the problem. Correct the error and begin another conversation.

ORA-19584: file string already in use
Cause: The indicated file, which was specified as the target for a copy, restore, or delete operation is already in use by the database.
Action: Specify a different name and retry the operation.
ORA-19585: premature end of volume on piece string
Cause: While creating the indicated backup piece, an end-of-volume condition was encountered before all of the backup set control data was written to the backup piece. This is most likely a media error, because the amount of backup set control data is very small in relation to the total amount of data in a backup set.
Action: Retry the piece with a larger piece of output media.
ORA-19586: string k-byte limit is too small to hold piece directory
Cause: The user-specified limit of k-bytes per backup piece is not enough to hold the backup set control data.
Action: Use the SETLIMIT procedure to increase the k-byte limit and retry the operation.

ORA-19587: error occurred reading string bytes at block number string
Cause: An error occurred while reading from a file.
Action: One or more other messages should be displayed to help pinpoint the cause of the error. Correct the error then retry the copy, backup, or restore operation.
ORA-19588: string RECID string STAMP string is no longer valid
Cause: The indicated record has been marked as deleted. This indicates that the corresponding file has either been overwritten by another copy or restore, or that the copy was ‘consumed’ by a SWITCHTOCOPY operation.
Action: If you know the name of the file you wish to copy, then inspect it and then retry the copy specifying the new RECID.
ORA-19589: string is not a snapshot or backup control file
Cause: The control file that is the source for a backup or copy operation is not a snapshot or backup control file.
Action: Specify the name of a snapshot or backup control file.
ORA-19590: conversation already active
Cause: You tried to begin a backup or restore conversation, but another conversation is already active in this session.
Action: Either continue the current conversation, or call BACKUPCANCEL or RESTORECANCEL to end the current conversation before starting a new one.

Above are list of Oracle Database Errors or Warnings from Error ORA-19581 to ORA-19590 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-19572 to ORA-19580

SQLServerF1

ORA-19572: cannot process file string, file is being being resized
Cause: The input file specified for a copy or backup operation could not be opened because the file is being resized.
Action: Wait for the resize to complete then retry the copy or backup.
ORA-19573: cannot obtain string enqueue for datafile string
Cause: The file access enqueue could not be obtained for a file specified in a backup, copy or restore operation. If the enqueue type shown is ‘shared’, then the file is the input file for a backup or copy. If the type is ‘exclusive’, then the file is the output file for a datafile copy or restore which is attempting to overwrite the currently active version of that file – in this case, the file must be offline or the database must be closed. If the type is ‘read-only’, then you are attempting to back up or copy this file while the database is in NOARCHIVELOG mode.
Action: Wait until the conflicting operation is complete, then retry the copy or backup. If the database is in NOARCHIVELOG mode, then all files being backed up must be closed cleanly.
ORA-19574: output file name must be specified
Cause: This type of copy or restore requires an output file name.
Action: Specify an output file name and retry the copy.

ORA-19575: expected string blocks in file string, found string
Cause: During a backup, restore, copy, or scan operation, the indicated file did not contain as many blocks as were indicated in the file header.
Action: The input copy or backup piece is probably corrupt. If another backup or copy exists of the file that is being restored, then the corrupt file can be deleted from the recovery catalog and the operation can be restarted.
ORA-19576: datafile string not defined in control file
Cause: The specified file number was not found in the control file.
Action: Specify a correct file number and retry the operation.
ORA-19577: file string is MISSING
Cause: A COPYDATAFILECOPY, RESTOREDATAFILETO or PROXYRESTOREDATAFILE function specified a file number but no output file name, indicating that the output file name should be taken from the control file. However, the control file entry for this file indicates that it was created for a file that was present in the data dictionary but not named during the last CREATE CONTROLFILE statement, so the name in the control file cannot be used for restoration.
Action: Either specify an output file name or issue a SQL RENAME command to enter a valid name for this file in the control file.

ORA-19578: end of volume while duplexing to sequential files, backup piece incomplete
Cause: An end of volume (EOV) condition was detected while duplexing to sequential files, and this condition cannot be handled currently.
Action: Before retrying the backup, make sure the backup pieces will fit in the volume, or disable duplexing.
ORA-19579: archived log record for string not found
Cause: No archived log record corresponding to input file could be found in the control file.
Action: Specify a valid archived log file name and retry the operation.
ORA-19580: string conversation not active
Cause: A backup or restore operation was attempted before a conversation was started.
Action: Start a conversation then retry the operation.

Above are list of Oracle Database Errors or Warnings from Error ORA-19572 to ORA-19580 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-19562 to ORA-19571

SQLServerF1

ORA-19562: file string is empty
Cause: The indicated file, which is an archived log, control file, or datafile was found to be empty during a copy, backup, or scan] operation.
Action: Ensure that the correct files are being specified for the copy or backup operation.
ORA-19563: string header validation failed for file string
Cause: When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (datafile, archived log, or control file) belonging to the current database.
Action: Ensure that the correct files are being specified for the copy or backup operation.
ORA-19564: error occurred writing string bytes at block number string
Cause: An error occurred while writing to a file.
Action: One or more other messages should be displayed to help pinpoint the cause of the error. Correct the error if possible, then retry the copy, backup, or restore operation.

ORA-19565: BACKUP_TAPE_IO_SLAVES not enabled when duplexing to sequential devices
Cause: An attempt was made to specify duplexing to sequential devices, but the BACKUP_TAPE_IO_SLAVES initialization parameter was not enabled.
Action: Specify BACKUP_TAPE_IO_SLAVES=TRUE in the INIT.ORA file, or do not specify duplexing to sequential devices.
ORA-19566: exceeded limit of string corrupt blocks for file string
Cause: The user specified limit of allowable corrupt blocks was exceeded while reading the specified datafile for a datafile copy or backup.
Action: None. The copy or backup operation fails. The session trace file contains detailed information about which blocks were corrupt.
ORA-19567: cannot shrink file string because it is being backed up or copied
Cause: An ALTER statement attempted to reduce the size of the indicated file while the same file is being backed up or copied.
Action: Retry the resize after the backup or copy is complete.

ORA-19568: a device is already allocated to this session
Cause: A device cannot be allocated to a session if another device is already allocated.
Action: Deallocate the current device
ORA-19569: no device is allocated to this session
Cause: An operation was attempted which requires a device to be allocated to the current session, and there is no device allocated.
Action: Allocate a device then retry the operation.
ORA-19570: file number string is outside valid range of 1 through string
Cause: A file number used in a copy, backup, or restore operation is not valid for the current database.
Action: Specify a valid file number.
ORA-19571: string RECID string STAMP string not found in control file
Cause: The input file specified for a copy or backup operation could not be opened because the record describing the file is not found in the control file.
Action: Specify a correct RECID/STAMP and retry the copy or backup.

Above are list of Oracle Database Errors or Warnings from Error ORA-19562 to ORA-19571 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-19552 to ORA-19561

SQLServerF1

ORA-19552: device type string is invalid
Cause: The device type indicated is invalid.
Action: Supply a correct device type and retry the allocation.
ORA-19553: device name string is invalid
Cause: The device name indicated is invalid.
Action: Supply a correct device name and retry the allocation.
ORA-19554: error allocating device, device type: string, device name: string
Cause: The specified device could not be allocated.
Action: One or more other messages should be displayed to help pinpoint the cause of the error. Correct the error and retry the allocation.

ORA-19555: invalid LOG_ARCHIVE_MIN_SUCCEED_DEST parameter value
Cause: The value of parameter LOG_ARCHIVE_MIN_SUCCEED_DEST was not set within the valid range.
Action: Specify a correct value for parameter LOG_ARCHIVE_MIN_SUCCEED_DEST. If the archive log parameters LOG_ARCHIVE_DEST or LOG_ARCHIVE_DUPLEX_DEST are in use, set parameter LOG_ARCHIVE_MIN_SUCCEED_DEST to either 1 or 2.
ORA-19556: required destination LOG_ARCHIVE_DUPLEX_DEST currently is deferred
Cause: The destination for parameter LOG_ARCHIVE_DUPLEX_DEST was deferred when it was required to be enabled. The destination was deferred automatically when an ALTER SYSTEM command for parameter LOG_ARCHIVE_DEST defined a destination which duplicated an existing LOG_ARCHIVE_DUPLEX_DEST parameter destination.
Action: Change the destination value for the LOG_ARCHIVE_DUPLEX_DEST parameter.
ORA-19557: device error, device type: string, device name: string
Cause: An error occurred in the platform-specific device code
Action: One or more other messages should be displayed to help pinpoint the cause of the error. Correct the error and retry the allocation.

ORA-19558: error de-allocating device
Cause: The specified device could not be de-allocated.
Action: One or more other messages should be displayed to help pinpoint the cause of the error. Correct the error and retry the allocation.
ORA-19559: error sending device command: string
Cause: An error occurred while sending the indicated command to the session device.
Action: One or more other messages should be displayed to help pinpoint the cause of the error. Correct the error and retry the allocation.
ORA-19560: string is not a valid device limit
Cause: An invalid type of device limit was specified in a call to DBMS_BACKUP_RESTORE.SETLIMIT.
Action: Use one of the documented limits: KBYTES, READRATE, or PARALLEL.
ORA-19561: string requires a DISK channel
Cause: The attempted command requires that a DISK device channel be allocated to the session, but a non-DISK device was found.
Action: Deallocate the current device and allocate a DISK channel, then then retry the command.

Above are list of Oracle Database Errors or Warnings from Error ORA-19552 to ORA-19561 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

SAP Business Objects Error Messages from Error UX0059 to UX0061

SQLServerF1

RSS file not accessible. (UX0059)
Cause One .rss file is created for each database you are using. This file contains the necessary connection information, and is stored in the database folder: $INSTALLDIR\Business Objects6.0\dataAccess\RDBMS\legacy\ <database name>
This error is generated if BusinessObjects cannot find the .rss file under the database folder,andthereforecannotestablishaconnectiontothedatabase.
Action Copy a backup of the .rss file to the database folder. If you do not have a backup, a supervisor must recreate the connection in Supervisor.

Incorrect SQL used. (UX0060)
Cause A List of Values (LOV) is a file which contains the data values associated with an object, and is stored in the document domain. This message may be generated when you try to access a universe with an associated LOV using freehand SQL statements that you enter in the SQL Editor. The SQL you used may not be compatible with your corporate database.
Action Check which versions of SQL are supported by your corporate database.
Cause BusinessObjects has encountered an exceptional error while attempting to access your corporate database.
Action Contact Business Objects Customer Support.

Not enough memory. (UX0061)
Cause Windows does not have sufficient memory to run the various server systems that were configured.
Action Review the system requirements to ensure that you have sufficient memory for Business Objects. Youcanalsocloseotherapplications tofreeup memory.
Empty your Recycle Bin and delete any unnecessary files.

Above are list of SAP Business Objects Error Messages from Error UX0059 to UX0061 received while performing certain operation against SAP Business Objects Business Intelligence Suite or related products.

What are SAP Business Objects Error Messages?

There are many different types of error messages received while using SAP Business Objects Business Intelligence Suite which include Administration (ADM) Errors,
Administration Wizard (ADW) Errors, BI Platform Servers (FWB) Errors , BIP Framework Middleware (FWM) Errors , Security (USR) Errors, Crystal Reports Errors, Dashboard and Analytics (EPM) Errors, Data Access Errors, Document and Universe Exchange Errors, Enterprise Application Errors, GUI Errors, Import Wizard (IWZ) Errors, List of Values Errors, SAP Live Office (LO) Errors, Metadata Bridges and Universe Builder (MDB) Errors, Publishing (FBE) Errors, Process Tracker (PT) Errors, SAP Query as a Web Service (QWS) Errors, Report Conversion Tool (RCT) Errors, Setup Errors , Translation Manager (UTM) Errors, Universe Errors, Voyager Errors, Web Intelligence Errors, HTTP errors.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about SAP Business Objects Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting MYSQL or MariaDB Errors from Error 1271 to 1280

SQLServerF1

MariaDB ERROR Code 1271
MySQL SQL State HY000
ER_CANT_AGGREGATE_NCOLLATIONS
Illegal mix of collations for operation ‘%s’
MariaDB ERROR Code 1272
MySQL SQL State HY000
ER_VARIABLE_IS_NOT_STRUCT
Variable ‘%s’ is not a variable component (can’t be used as XXXX.variable_name)
MariaDB ERROR Code 1273
MySQL SQL State HY000
ER_UNKNOWN_COLLATION
Unknown collation: ‘%s’

MariaDB ERROR Code 1274
MySQL SQL State HY000
ER_SLAVE_IGNORED_SSL_PARAMS
SSL parameters in CHANGE MASTER are ignored because this MariaDB slave was compiled without SSL support; they can be used later if MariaDB slave with SSL is started
MariaDB ERROR Code 1275
MySQL SQL State HY000
ER_SERVER_IS_IN_SECURE_AUTH_MODE
Server is running in –secure-auth mode, but ‘%s’@’%s’ has a password in the old format; please change the password to the new format
MariaDB ERROR Code 1276
MySQL SQL State HY000
ER_WARN_FIELD_RESOLVED
Field or reference ‘%s%s%s%s%s’ of SELECT #%d was resolved in SELECT #%d

MariaDB ERROR Code 1277
MySQL SQL State HY000
ER_BAD_SLAVE_UNTIL_COND
Incorrect parameter or combination of parameters for START SLAVE UNTIL
MariaDB ERROR Code 1278
MySQL SQL State HY000
ER_MISSING_SKIP_SLAVE
It is recommended to use –skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave’s mysqld restart
MariaDB ERROR Code 1279
MySQL SQL State HY000
ER_UNTIL_COND_IGNORED
SQL thread is not to be started so UNTIL options are ignored
MariaDB ERROR Code 1280
MySQL SQL State 42000
ER_WRONG_NAME_FOR_INDEX
Incorrect index name ‘%s’

Above are the list of shared MySQL and MariaDB Error Codes and their Description including SQL state and exact error code from Error 1271 to 1280 which performing certain operations against MySQL or MariaDB.

What are MYSQL/MariaDB Errors?

MySQL and MariaDB programs have access to several types of common error information when the server returns an error.

The MYSQL/MariaDB message displayed contains three types of information:
A numeric error code. This number is MySQL-specific and is not portable to other database systems.
A five-character SQLSTATE value. The values are specified by ANSI SQL and ODBC and are more standardized. Not all MySQL error numbers are mapped to SQLSTATE error codes.
A message string that provides a textual description of the error.
When an error occurs, you can access the MySQL error code, the SQLSTATE value, and the message string using C API functions:
MySQL error code: Call mysql_errno()
SQLSTATE value: Call mysql_sqlstate()
Error message: Call mysql_error()

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about MYSQL and MariaDB Error Codes and Error Messages or Warnings on Windows, Linux Operating Systems.

 

Troubleshooting MYSQL or MariaDB Errors from Error 1261 to 1270

SQLServerF1

MariaDB ERROR Code 1261
MySQL SQL State 01000
ER_WARN_TOO_FEW_RECORDS
Row %ld doesn’t contain data for all columns
MariaDB ERROR Code 1262
MySQL SQL State 01000
ER_WARN_TOO_MANY_RECORDS
Row %ld was truncated; it contained more data than there were input columns
MariaDB ERROR Code 1263
MySQL SQL State 22004
ER_WARN_NULL_TO_NOTNULL
Column set to default value; NULL supplied to NOT NULL column ‘%s’ at row %ld

MariaDB ERROR Code 1264
MySQL SQL State 22003
ER_WARN_DATA_OUT_OF_RANGE
Out of range value for column ‘%s’ at row %ld
MariaDB ERROR Code 1265
MySQL SQL State 01000
WARN_DATA_TRUNCATED
Data truncated for column ‘%s’ at row %ld
MariaDB ERROR Code 1266
MySQL SQL State HY000
ER_WARN_USING_OTHER_HANDLER
Using storage engine %s for table ‘%s’

MariaDB ERROR Code 1267
MySQL SQL State HY000
ER_CANT_AGGREGATE_2COLLATIONS
Illegal mix of collations (%s,%s) and (%s,%s) for operation ‘%s’
MariaDB ERROR Code 1268
MySQL SQL State HY000
ER_DROP_USER
Cannot drop one or more of the requested users
MariaDB ERROR Code 1269
MySQL SQL State HY000
ER_REVOKE_GRANTS
Can’t revoke all privileges for one or more of the requested users
MariaDB ERROR Code 1270
MySQL SQL State HY000
ER_CANT_AGGREGATE_3COLLATIONS
Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation ‘%s’

Above are the list of shared MySQL and MariaDB Error Codes and their Description including SQL state and exact error code from Error 1261 to 1270 which performing certain operations against MySQL or MariaDB.

What are MYSQL/MariaDB Errors?

MySQL and MariaDB programs have access to several types of common error information when the server returns an error.

The MYSQL/MariaDB message displayed contains three types of information:
A numeric error code. This number is MySQL-specific and is not portable to other database systems.
A five-character SQLSTATE value. The values are specified by ANSI SQL and ODBC and are more standardized. Not all MySQL error numbers are mapped to SQLSTATE error codes.
A message string that provides a textual description of the error.
When an error occurs, you can access the MySQL error code, the SQLSTATE value, and the message string using C API functions:
MySQL error code: Call mysql_errno()
SQLSTATE value: Call mysql_sqlstate()
Error message: Call mysql_error()

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about MYSQL and MariaDB Error Codes and Error Messages or Warnings on Windows, Linux Operating Systems.

 

Troubleshooting MYSQL or MariaDB Errors from Error 1251 to 1260

SQLServerF1

MariaDB ERROR Code 1251
MySQL SQL State 08004
ER_NOT_SUPPORTED_AUTH_MODE
Client does not support authentication protocol requested by server; consider upgrading MariaDB client
MariaDB ERROR Code 1252
MySQL SQL State 42000
ER_SPATIAL_CANT_HAVE_NULL
All parts of a SPATIAL index must be NOT NULL
MariaDB ERROR Code 1253
MySQL SQL State 42000
ER_COLLATION_CHARSET_MISMATCH
COLLATION ‘%s’ is not valid for CHARACTER SET ‘%s’

MariaDB ERROR Code 1254
MySQL SQL State HY000
ER_SLAVE_WAS_RUNNING
Slave is already running
MariaDB ERROR Code 1255
MySQL SQL State HY000
ER_SLAVE_WAS_NOT_RUNNING
Slave already has been stopped
MariaDB ERROR Code 1256
MySQL SQL State HY000
ER_TOO_BIG_FOR_UNCOMPRESS
Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)

MariaDB ERROR Code 1257
MySQL SQL State HY000
ER_ZLIB_Z_MEM_ERROR
ZLIB: Not enough memory
MariaDB ERROR Code 1258
MySQL SQL State HY000
ER_ZLIB_Z_BUF_ERROR
ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)
MariaDB ERROR Code 1259
MySQL SQL State HY000
ER_ZLIB_Z_DATA_ERROR
ZLIB: Input data corrupted
MariaDB ERROR Code 1260
MySQL SQL State HY000
ER_CUT_VALUE_GROUP_CONCAT
Row %u was cut by GROUP_CONCAT()

Above are the list of shared MySQL and MariaDB Error Codes and their Description including SQL state and exact error code from Error 1251 to 1260 which performing certain operations against MySQL or MariaDB.

What are MYSQL/MariaDB Errors?

MySQL and MariaDB programs have access to several types of common error information when the server returns an error.

The MYSQL/MariaDB message displayed contains three types of information:
A numeric error code. This number is MySQL-specific and is not portable to other database systems.
A five-character SQLSTATE value. The values are specified by ANSI SQL and ODBC and are more standardized. Not all MySQL error numbers are mapped to SQLSTATE error codes.
A message string that provides a textual description of the error.
When an error occurs, you can access the MySQL error code, the SQLSTATE value, and the message string using C API functions:
MySQL error code: Call mysql_errno()
SQLSTATE value: Call mysql_sqlstate()
Error message: Call mysql_error()

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about MYSQL and MariaDB Error Codes and Error Messages or Warnings on Windows, Linux Operating Systems.

 

Troubleshooting MYSQL or MariaDB Errors from Error 1241 to 1250

SQLServerF1

MariaDB ERROR Code 1241
MySQL SQL State 21000
ER_OPERAND_COLUMNS
Operand should contain %d column(s)
MariaDB ERROR Code 1242
MySQL SQL State 21000
ER_SUBQUERY_NO_1_ROW
Subquery returns more than 1 row
MariaDB ERROR Code 1243
MySQL SQL State HY000
ER_UNKNOWN_STMT_HANDLER
Unknown prepared statement handler (%.*s) given to %s

MariaDB ERROR Code 1244
MySQL SQL State HY000
ER_CORRUPT_HELP_DB
Help database is corrupt or does not exist
MariaDB ERROR Code 1245
MySQL SQL State HY000
ER_CYCLIC_REFERENCE
Cyclic reference on subqueries
MariaDB ERROR Code 1246
MySQL SQL State HY000
ER_AUTO_CONVERT
Converting column ‘%s’ from %s to %s

MariaDB ERROR Code 1247
MySQL SQL State 42S22
ER_ILLEGAL_REFERENCE
Reference ‘%s’ not supported (%s)
MariaDB ERROR Code 1248
MySQL SQL State 42000
ER_DERIVED_MUST_HAVE_ALIAS
Every derived table must have its own alias
MariaDB ERROR Code 1249
MySQL SQL State 01000
ER_SELECT_REDUCED
Select %u was reduced during optimization
MariaDB ERROR Code 1250
MySQL SQL State 42000
ER_TABLENAME_NOT_ALLOWED_HERE
Table ‘%s’ from one of the SELECTs cannot be used in %s

Above are the list of shared MySQL and MariaDB Error Codes and their Description including SQL state and exact error code from Error 1241 to 1250 which performing certain operations against MySQL or MariaDB.

What are MYSQL/MariaDB Errors?

MySQL and MariaDB programs have access to several types of common error information when the server returns an error.

The MYSQL/MariaDB message displayed contains three types of information:
A numeric error code. This number is MySQL-specific and is not portable to other database systems.
A five-character SQLSTATE value. The values are specified by ANSI SQL and ODBC and are more standardized. Not all MySQL error numbers are mapped to SQLSTATE error codes.
A message string that provides a textual description of the error.
When an error occurs, you can access the MySQL error code, the SQLSTATE value, and the message string using C API functions:
MySQL error code: Call mysql_errno()
SQLSTATE value: Call mysql_sqlstate()
Error message: Call mysql_error()

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about MYSQL and MariaDB Error Codes and Error Messages or Warnings on Windows, Linux Operating Systems.

 
1 2 3 5