Troubleshooting Informatica Error Messages and Resolution – Part 260

SQLServerF1

PMF_15006Failed to create file <file name> because file exists and contains data.
Cause:The Integration Service failed to remove the previous file and detected a file containing data and failed to overwrite it.
Action:Check the file and manually delete it or rename it. Run the session again.
PMF_15007Failed to read file <file name> because PowerCenter/PowerMart file header is corrupt.
Cause:The file might be corrupt due to a system crash on a previous session run.
Action:Use the backup file (filename.bak), if available, and run the session again.
or
Cause:Internal error.
Action:Contact Informatica Technical Support.

PMF_15008I/O requested for invalid file ID.
Cause:Internal error.
Action:Use the backup file filename.bak.
or
Action:Contact Informatica Technical Support.
PMF_15009Specified file name <file name> exceeds the maximum length of 256 characters.
Cause:Internal error. You may have repository inconsistencies.
Action:Contact Informatica Technical Support.
PMF_15010The number of files exceeds the maximum number of 256.
Cause:The cache exceeded half a terabyte.
Action:Contact Informatica Technical Support.

PMF_15011Unable to allocate memory.
Cause:Error in heap memory allocation. Your system resources may be low.
Action:Free existing resources.
or
Action:Increase the swap space. You may need to add RAM to your system.
PMF_15012 Unable to delete file <cache file name>. System error is <error number> <error message>.
Cause:This file might be in use.
Action:Check the session that is running. See the system error for more information.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 259

PMF_15000Failed to read from file <file name>.
Cause:The Integration Service failed to read the file. The file might be already open, or the disk might be corrupt.
Action:Check the session log for related errors.
PMF_15001Failed to write to file, there may not be enough space left on the device.
Cause:The hard disk is full.
Action:Check the disk for free space, and check the session log for related errors.

PMF_15002Failed to seek in file <file name>.
Cause:The file pointer failed to locate the file. You might have deleted or moved the file, or the hard disk might be corrupt.
Action:Check the session log for related errors.
PMF_15003File <file name> is not in the correct format.
Cause:You might have altered the format of the file. For example, you copied another file to the file.
Action:Use a previous copy of the file that has the correct format.
or
Cause:Internal error.
Action:Contact Informatica Technical Support.
PMF_15004Unable to open file <file name>.
Cause:You might not have the correct write file permissions.
Action:Make sure you have the proper write permissions.
or
Cause:You provided an incorrect file name or cache directory that the Integration Service cannot locate.
Action:Provide the correct file name and aggregation cache directory in the Workflow Manager.

PMF_15005File <file name> is in an unknown state due to error from a previous run.
Cause:The system shut down unexpectedly during the previous run.
Action:Use the backup file (filename.bak).

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 258

SQLServerF1

PETL_24061The Master DTM exceeded the maximum wait time while waiting for all Worker DTMs to connect.
Cause:The master DTM process waited longer than the maximum amount of time allotted to wait for worker DTM processes to connect. The node running the worker DTM process may have failed, or connectivity to the worker DTM process may have failed. Or, the worker DTM process may have shut down unexpectedly.
Action:Same as PETL_24042.
PETL_24063The Preparer DTM encountered error <error message> with error code <error code> while notifying the Integration Service of the prepare phase status.
Cause:An error prevented the preparer DTM process from connecting to the Integration Service.
Action:Use the returned error code message to determine the cause of this error.
PETL_24064Thread <thread ID> waited for <time in seconds> seconds for a message. The current number of attempts is <attempt number> and the maximum number of attempts is <maximum number of attempts>.
Cause:An error prevented the preparer DTM process from connecting to the Integration Service.
Action:Use the returned error code message to determine the cause of this error.
PETL_24065Error: Thread <thread name> exceeded the maximum wait time while waiting for a reply from the Master DTM.
Cause:A worker DTM process waited longer than the maximum amount of time allotted to wait for a reply from the master DTM process.
Action:Same as PETL_24042.
PETL_24066The Master DTM connection with the Worker DTM running partition group <partition group ID> was broken unexpectedly. The Master DTM will abort processing.
Cause:The master DTM process detected that a worker DTM process failed unexpectedly.
Action:Same as PETL_24042.
PETL_24067The Worker DTM connection with the Master DTM terminated unexpectedly. The Worker DTM will stop processing the session.
Cause:The worker DTM process detected that a connection to the master DTM process failed. The master DTM process and worker DTM process may be on different nodes and there may be a network failure.
Action:Same as PETL_24042.
PETL_24074Failed to send updates to the master service process. Session run will be terminated.
Cause:The master DTM process was unable to send updates to the master service process.
Action:Same as PETL_24042.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 257

PETL_24042The Preparer DTM has timed out after waiting <time in seconds> seconds for the Master DTM to connect.
Cause:The master DTM process was unable to connect with the preparer DTM process. The master DTM process may have shut down unexpectedly. The master DTM process may be on another node and there may be a network failure.
Action:View the workflow log to see if the DTM process started on the node. If the DTM process started and shut down unexpectedly, the error is internal. If the error is not internal, check with the Network Administrator to verify that the network does not have connectivity issues. Check with the domain Administrator to verify that the Integration Service is running. Run the session again.

PETL_24045The Master DTM failed to connect to the Preparer DTM.
Cause:The master DTM process failed to connect to the preparer DTM process. There may be a network failure and the master DTM and preparer DTM processes are running on different nodes. The preparer DTM process may have shut down unexpectedly.
Action:Same as PETL_24042.
PETL_24046The Master DTM timed out after <time in seconds> seconds while trying to connect to the Preparer DTM.
Cause:The master DTM process timed out attempting to connect with the preparer DTM process. The master DTM and the preparer DTM processes may be running on separate nodes and there is a network failure. The preparer DTM process may have shut down unexpectedly.
Action:Same as PETL_24042.

PETL_24048The Master DTM failed to fetch the prepared session from the Preparer DTM.
Cause:The master DTM process was unable to connect with the preparer DTM process. The master DTM and preparer DTM processes may be on separate nodes and there may be a network failure. The preparer DTM process may have shut down unexpectedly.
Action:Same as PETL_24042.
PETL_24049Failed to get the initialization properties from the master service process for the prepare phase <error message> with error code <error code>.
Cause:The preparer DTM process was unable to retrieve run time properties from the Integration Service due to an error.
Action:Use the returned error code error message to determine the cause of this error.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

<strong>What are Informatica Error Messages?</strong>

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
<strong>SQLServerF1 Team</strong>
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 256

SQLServerF1

PCSF_46007No gateway connectivity is provided for domain [<domain name>].
Cause:The domains.infa file does not contain the information necessary to connect to the domain or the domains.infa does not exist.
Action:Ping the domain using infacmd ping and provide the gateway address. If the connection is invalid, infacmd ping adds or updates domains.infa. If the domain is not running, ask the domain administrator to start Informatica Services.
Action:If you attempted to connect to a repository with the PowerCenter Client, remove the repository in the Navigator and add the repository again.

PCSF_46008Failed to look up service.
Cause:The Service Manager on the gateway is not running, and cannot accept the request.
Action:Use the infacmd ping to verify that the domain is running and the connection parameters are configured correctly. If the domain is running, infacmd displays the host name and port number of the domain. If the domain is stopped or unavailable, ask the domain administrator to start Informatica Services. Contact Informatica Technical Support if the domain is running and you continue to receive an error.
PCSF_46009Invalid type <object type> encountered. Failed to create an object instance.
Same as PCSF_46002
PCSF_46010Cannot parse message: <reason for error>
Cause:You specified the incorrect domain name, gateway host name, or port number from a PowerCenter client application, such as pmcmd or the Designer.
Action:Verify that you use the correct gateway information. If the gateway information is correct, and you continue to receive this error, contact Informatica Technical Support.
or
Cause:The Domain Service could not parse the SOAP message received from a remote client, such as an FTP server.
Action:Review the log for related messages to find out more information.
or
Action:Contact Informatica Technical Support.

PCSF_46012Cannot write to file <file name>.
Same as PCSF_10020.
PCSF_46013Cannot connect to URL < URL > to perform operation <operation name> of service <service name>.
Same as PCSF_10304.
PCSF_46014Cannot connect to gateway to look up service <service>.
Same as PCSF_10305.
PCSF_46015An unexpected token was encountered during deserialization.
Same as PCSF_10095.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 255

PCSF_10443CPU architecture <architecture name> is not supported.
Cause:The node is starting on an unsupported platform.
Action:Run PowerCenter only on supported platforms.
PCSF_10445Option <option name> is greater than option <option name>.
Cause:A minimum option value is greater than a maximum option value.
Action:Make sure the minimum value is less than or equal to the maximum.
PCSF_10446Option memory size <invalid value> must be blank or a number followed by optional K or M.
Cause:A number option contained invalid memory size format.
Action:Enter a valid memory size format.

PCSF_46000INFA_DOMAINS_FILE is not set in the environment variable.
Cause:You can use the environment variable INFA_DOMAINS_FILE to store the domains.infa path. You will receive an error if the environment variable INFA_DOMAINS_FILE is not set.
Action:Add the environment variable INFA_DOMAINS_FILE, and set the path to the domains.infa file. By default, the domains.infa file resides in the infa_home directory.
PCSF_46002Failed to communicate with the server at <server address>.
Cause:The request exceeded the timeout period due to an invalid connection or domain not running.
Action:Ping the domain using infacmd ping and provide the gateway address. If the connection is invalid, infacmd ping adds or updates domains.infa file. If the domain is not running, ask the domain administrator to start Informatica Services.
PCSF_46003Failed to understand the response [<response text>] from server at [<server address>]: <error text>.
Cause:A PowerCenter component failed to understand the response from a PowerCenter service due to an error.
Action:Correct the error indicated in the message.

PCSF_46006Domain name is not specified.
Cause:The command line programs require the domain name, which you provide as an option at the command prompt. If you incorrectly type this information, you will receive an error.
Action:Verify that you typed the domain name at the command prompt correctly. Optionally, you can store the domain name as the environment variable INFA_DEFAULT_DOMAIN. If you have more than one domain, choose a default domain.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 254

SQLServerF1

PCSF_10430Duplicate option <duplicate option name> found.
Cause:Domain metadata is invalid with duplicate option.
Action:Back up the domain, correct the backup (XML) file, and restore the domain.
PCSF_10431Unknown option <option name> found.
Cause:Domain metadata is invalid with an unknown option.
Action:Back up the domain, correct the backup (XML) file, and restore the domain.

PCSF_10432Option group <expected option group name> misnamed as <actual option group name>.
Cause:Domain metadata is invalid with wrong option group name.
Action:Back up the domain, correct the backup (XML) file, and restore the domain.
PCSF_10433Option field cannot be empty.
Cause:Domain metadata is invalid with empty option.
Action:Back up the domain, correct the backup (XML) file, and restore the domain.
PCSF_10434Option specified an invalid email address of <entered email address>.
Cause:Domain metadata is invalid with invalid email address.
Action:Back up the domain, correct the backup (XML) file, and restore the domain.
PCSF_10436Unknown value <unknown value> found.
Cause:An unknown value was encountered in an object.
Action:If problem persists, please contact Informatica Technical Support.

PCSF_10439Failed to load the list of codepages: <SDK exception message from locale manager>
Cause:Loading the list of codepages failed when fetching from locale manager.
Action:If problem persists, contact Informatica Technical Support
PCSF_10440Value <value> contains invalid spaces.
Cause:A value contains invalid spaces.
Action:Remove all spaces from the value.
PCSF_10441Reference to linked domain <domain name> not defined.
Cause:Attempting to communicate with a linked domain not in domain metadata.
Action:Add appropriate linked domain then try again.
PCSF_10442Failed to drop domain tables.
Cause:Database connection could not delete the domain.
Action:Make sure the database is running.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 253

SQLServerF1

PCSF_10422Error parsing upgrade configuration file. The start of block comment was detected at line #<line number>; however, the end string */ for ending block comment was never found.
Cause:You started a comment block that was not ended in a Repository Agent or PowerCenter Server configuration file.
Action:Correct the configuration file and place the end comment string in the file. Then validate and upgrade the configuration file again.

PCSF_10423File [<file name>] is a Repository Agent configuration file. Choose a PowerCenter Server configuration file or change the configuration file type.
Cause:In the Upgrade Wizard, you chose a Repository Agent configuration file, but selected a PowerCenter Server file type.
Action:Choose a PowerCenter Server configuration file or change the file type.
PCSF_10424File [<file name>] is a PowerCenter Server configuration file. Choose a Repository Agent configuration file or change the configuration file type.
Cause:In the Upgrade Wizard, you chose a PowerCenter Server configuration file, but selected a Repository Agent file type.
Action:Choose a Repository Agent configuration file or change the file type.
PCSF_10426Cannot find server [<server name>] in repository [<repository name>].
Cause:The PowerCenter Server is not registered to the associated repository in the PowerCenter Server configuration file.
Action:Register the PowerCenter Server to the associated repository in the previous version of PowerCenter. Move the configuration file to the server/upgrade/cfgfiles/PCServer directory on the node and validate and upgrade the PowerCenter Server again.

PCSF_10427Option has invalid value <invalid value>.
Cause:Option contains an invalid value.
Action:Use the default value.
PCSF_10428Option number <invalid value> is in an invalid format.
Cause:A number option contained invalid numeric format.
Action:Use the default value.
PCSF_10429Required option <option name> missing.
Cause:Domain metadata is invalid with missing required option.
Action:Back up the domain, correct the backup (XML) file, and restore the domain.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Informatica Error Messages and Resolution – Part 252

SQLServerF1

PCSF_10408Failed at line #<line number> because option is missing value assignment
Cause:The Repository Agent or PowerCenter Server configuration file contains a property without an associated value at a specific line number.
Action:Correct the value for the property at the line number in the configuration file and validate and upgrade the Repository Agent or PowerCenter Server configuration file again.

PCSF_10410The selected configuration file [<file name>] is a PowerCenter Server configuration file. The global_repo or local_repo directory should only contain Repository Agent configuration files. Move [<file name>] to the PCServer directory.
Cause:You placed a PowerCenter Server configuration file in the global_repo or local_repo directory under the server/upgrade/cfgfiles directory on a node. However, the global_repo or local_repo directory can only contain Repository Agent configuration files.
Action:Move the PowerCenter Server configuration file to the PCServer directory under the server/upgrade/cfgfiles directory on the node and validate the configuration files again.

PCSF_10414<error text> Please use the previous version of PowerCenter to backup the repository contents and restore them to a new repository with a name that contains valid characters. Then rerun the upgrade utility.
Cause:The [RepositoryName] property in the Repository Agent contains a tab character, a trailing space, or one of the following characters: ? ” : < > * / \ | .
Action:Back up the repository, restore it using a name that does not contain these characters, and the upgrade the Repository Agent configuration file again.
PCSF_10421Error parsing upgrade configuration file at line #<line number>. The end string */ for block comment must be at the end of the line.
Cause:In a Repository Agent or PowerCenter Server configuration file, the end block comment string ‘*/’ occurs in the middle of a line, but can only appear at the end of a line.
Action:Correct the configuration file and place the end comment string at the end of the line. Then validate and upgrade the configuration file again.

Above are list of Informatica Error Messages or Warnings received while performing certain operation against Informatica related products.

What are Informatica Error Messages?

Informatica error codes are a set of error codes for use by all Informatica products. Every Informatica error message returned by Informatica, is self explanatory and contains the object name in cases where required.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Informatica Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 

Troubleshooting Sybase Error Code from Error 21110 to 22000

SQLServerF1

Sybase Error Code 21110
Sybase SQL Code –1000281L
Column %2 has unsupported data type for index rebuild. %1
Sybase Error Code 21111
Sybase SQL Code –1010017L
You cannot create tables on a query node without a local IQ Store. %1
Sybase Error Code 21112
Sybase SQL Code –1010018L
Shared and local tables cannot participate in a JOIN INDEX. %1
Sybase Error Code 21113
Sybase SQL Code –1010019L
A Query node may not modify objects in the main IQ Store. %1

Sybase Error Code 21114
Sybase SQL Code –1010020L
Nothing to backup: Query node has no local store. %1
Sybase Error Code 21115
Sybase SQL Code –1010021L
Foreign key constraint on a local table cannot reference a shared table. %1
Sybase Error Code 21116
Sybase SQL Code –1000282
DBCC must be restricted to the MAIN or LOCAL store only. %1
Sybase Error Code 21117
Sybase SQL Code –1010022L
Cannot modify main store from a multiplex query server. %1
Sybase Error Code 21118
Sybase SQL Code –1009154L
Cannot alter dbspace when a backup is in progress

Sybase Error Code 21119
Sybase SQL Code –1006267L
%2 blocks is greater than the partition size of %3 blocks %1
Sybase Error Code 21120
Sybase SQL Code –1001062L
IQ does not support ASE extended group by syntax (%2) with OLAP function %1
Sybase Error Code 21121
Sybase SQL Code –1010023L
IQ does not support updatable cursor with JOIN/UNION/GROUP BY/DISTINCT/SET,OLAP function. %1
Sybase Error Code 21122
Sybase SQL Code –1010024L
Column ‘%2’ is not updatable if it is long binary/varchar, rowid, referenced in the select list, or not in FOR UPDATE list. %1
Sybase Error Code 21123
Sybase SQL Code –1010025L
The current row can not be updated since it has been deleted. %1
Sybase Error Code 22000
Sybase SQL Code –1009155L
Cannot perform requested command as there is an ALTER DBSPACE command in progress. %1

Above are list of Sybase Error Code Messages from Error Code 21110 to 22000 received while performing certain operation against Sybase Database or related products.

What are Sybase Error Codes?

Sybase error codes are a set of error codes for use by all Sybase products, including Adaptive Server Enterprise. For every Sybase error code returned by Sybase IQ, there is a pair of matching Sybase IQ error codes (SQLCODE and SQLSTATE). In many cases Sybase IQ error codes offer a finer level of granularity than their Sybase error code counterparts, thus some Sybase error codes in the following table are non-unique.

Many of the errors contain the characters %1, %2 and so on. These are replaced by the parameters to the error message.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Sybase Error Code Messages or Warning Messages on Windows and Linux Operating Systems.

 
1 2 3 16