Oracle Database Errors or Warnings from Error ORA-15180 to ORA-15198

SQLServerF1

ORA-15180: could not open dynamic library string, error [string]
Cause: The library was not accessible
Action: Correct the permissions of the library and try again.
ORA-15181: symbol [string] not found in library string, error [string]
Cause: An error was encountered while loading the specified ASMLIB symbol.
Action: Correct the error reported and try again.
ORA-15182: ASMLIB [string] version mismatch, ORACLE version [string]
Cause: The ASMLIB version reported is not supported by the ORACLE binary.
Action: Install the correct library and try again.

ORA-15183: ASMLIB initialization error [string]
Cause: Unable to initialize the ASMLIB in ORACLE.
Action: Contact ASMLIB library vendor support with the error details.
ORA-15184: ASMLIB error could not be determined [string] [string]
Cause: An error was encountered which cannot be diagnosed further.
Action: Contact ASMLIB libary vendor for support.
ORA-15185: could not close dynamic library string, error [string]
Cause: Could not close the dynamic library.
Action: Contact ASMLIB libary vendor for support.

ORA-15186: ASMLIB error function = [string], error = [string], mesg = [string]
Cause: An error occured during a call to function listed in the error.
Action: The detailed message associated with the error is listed along with the error. Correct the error and try again or contact ASMLIB library vendor for support.
ORA-15192: invalid ASM disk header [string] [string] [string] [string] [string]
Cause: ASM encountered an invalid disk header.
Action: Contact Oracle Support Services.
ORA-15196: invalid ASM block header [string:string] [string] [string] [string] [string != string]
Cause: ASM encountered an invalid metadata block.
Action: Contact Oracle Support Services.
ORA-15197: suppressing string additional ASM messages
Cause: The ASM command generated so many erorrs that this summary message was reported in place of many individual messages.
Action: If the command contained multiple actions, try separating each action into its own command and executing each command by itself. Otherwise, try not to generate so many errors.
ORA-15198: operation string is not yet available
Cause: An unimplemented operation was attempted.
Action: Consider upgrading to later releases as they become available.

Above are list of Oracle Database Errors or Warnings from Error ORA-15180 to ORA-15198 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15155 to ORA-15166

SQLServerF1

ORA-15155: version incompatible with the cluster
Cause: The current software version of the instance was incompatible with the other members of the cluster.
Action: Make sure that all the members of the cluster are at the same version. If you are attempting to perform rolling upgrade, execute ALTER SYSTEM START ROLLING command. Ensure that the version being upgraded to is compatible with the existing version of the cluster.
ORA-15156: cluster in rolling upgrade from version [string] to [string]
Cause: The current software version of the instance was incompatible with the rolling upgrade operation of the cluster.
Action: The version number of new member instance must be one of the two versions involved in the rolling upgrade.
ORA-15157: rolling migration is not allowed
Cause: The cluster was not capable of handling ASM rolling migration.
Action: The Oracle Cluster Services is using vendor clusterware. Oracle cannot perform rolling upgrade or downgrade using vendor cluster ware. Restart ASM instances using Oracle cluster ware and retry the operation.

ORA-15158: rolling upgrade prevented by string
Cause: One or more instances were blocking the rolling upgrade.
Action: Terminate or wait until the reported operation is complete before attempting the rolling upgrade to the cluster.
ORA-15160: rolling migration internal fatal error in module string,string
Cause: Rolling migration experienced a fatal error.
Action: Please contact Oracle support services.
ORA-15161: invalid SYS_CLUSTER_PROPERTIES parameter
Cause: The parameter passed in for SYS_CLUSTER_PROPERTIES is invalid
Action: Pass in the correct parameter, refer to user documentation for a list of allowed parameter values.

ORA-15162: cluster in rolling downgrade
Cause: The cluster was already in the middle of rolling downgrade.
Action: Rolling downgrade needs to be stopped before attempting to start again.
ORA-15163: cluster not in rolling downgrade
Cause: The cluster was not in rolling downgrade.
Action: Start the rolling downgrade using the ALTER SYSTEM START ROLLING command.
ORA-15164: cluster rolling downgrade incomplete
Cause: The cluster was still performing rolling downgrade.
Action: Ensure that all the instances in the cluster are downgraded before retrying the command.
ORA-15166: cluster in rolling downgrade from version [string] to [string]
Cause: The current software version of the instance was incompatible with the rolling downgrade operation of the cluster.
Action: The version number of new member instance must be one of the two versions involved in the rolling downgrade.

Above are list of Oracle Database Errors or Warnings from Error ORA-15155 to ORA-15166 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15129 to ORA-15154

SQLServerF1

ORA-15129: entry ‘string’ does not refer to a valid directory
Cause: The entry indicated did not refer to a directory. Attempt was made to access the contents of this directory.
Action: Correct the error and try again.
ORA-15130: diskgroup “string” is being dismounted
Cause: The diskgroup is being dismounted by request or because an I/O error was encountered that could not be handled by taking the disks offline. A disk cannot be offlined whenever doing so could result in all copies of a redundant extent being unavailable.
Action: Repair the hardware problem and re-mount the diskgroup. Refer to the alert log to determine which disks have failed.
ORA-15131: block string of file string in diskgroup string could not be read
Cause: A block could not be read because the disk containing the block is either offline or an I/O error occured while reading the block. If this is mirrored file, then all disks that contain a copy of the block are either offline or received errors.
Action: Repair the affected disk and bring it back online. Refer to accompanying error messages to determine which disk has failed.

ORA-15132: block string of file string in diskgroup string could not be written
Cause: A block could not be written because the disk containing the block is either offline or an I/O error occured while writing the block. If this is mirrored file, then insufficient disks which contain a copy of the block are either offline or received errors.
Action: Repair the affected disk and bring it back online. Refer to accompanying error messages to determine which disk has failed.
ORA-15133: instance recovery required for diskgroup string
Cause: An instance in the cluster crashed making instance recovery necessary.
Action: None. This error should not normally be seen by an ASM client. ASM will trap this error and retry the operation after doing instance recovery automatically.
ORA-15150: instance lock mode ‘string’ conflicts with other ASM instance(s)
Cause: Some other ASM instance used the lock name space in a conflicting mode.
Action: Shut down the other instance or start up in compatible mode. Alternatively, set the DB_UNIQUE_NAME initialization parameter to avoid the conflict.

ORA-15151: missing or invalid version number for rolling migration
Cause: The command did not sepcify a valid version number.
Action: Correct the version number in the command. It should be of the form v#.#.#.#.# or other forms with fewer numbers delimited by a period. The version number must be different from the current software version of the instance.
ORA-15152: cluster in rolling upgrade
Cause: The cluster was already in the middle of rolling upgrade.
Action: Rolling upgrade needs to be stopped before attempting to start again.
ORA-15153: cluster not in rolling upgrade
Cause: The cluster was not in rolling upgrade.
Action: Start the rolling upgrade using the ALTER SYSTEM START ROLLING command.
ORA-15154: cluster rolling upgrade incomplete
Cause: The cluster was still performing rolling upgrade.
Action: Ensure that all the instances in the cluster are upgraded before retrying the command.

Above are list of Oracle Database Errors or Warnings from Error ORA-15129 to ORA-15154 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15117 to ORA-15128

SQLServerF1

ORA-15117: command only operates on one diskgroup
Cause: An ALTER DISKGROUP, CREATE DISKGROUP, or DROP DISKGROUP command specified a list of diskgroups or the keyword ALL in a context where only a single diskgroup was permitted.
Action: Issue separate ALTER DISKGROUP, CREATE DISKGROUP, or DROP DISKGROUP commands to accomplish the desired action.
ORA-15120: ASM file name ‘string’ does not begin with the ASM prefix character
Cause: A file name was specified to ASM which did not begin with the ASM prefix character (currently ‘+’). ASM uses the prefix to determine that a file specification is in fact an ASM file.
Action: Correct the file name specification.
ORA-15121: ASM file name ‘string’ contains an invalid diskgroup name
Cause: A file name was specified that did not contain a valid diskgroup name. The diskgroup name follows immediately after the ASM prefix character. It must start with an alphabetic character, and consist of up to 30 characters which are alphabetic, numeric, or the characters ‘$’ and ‘_’.
Action: Correct the file name specification.

ORA-15122: ASM file name ‘string’ contains an invalid file number
Cause: A numeric file name was specified which did not contain a valid ASM file number. The ASM file number follows immediately after the diskgroup name. It must be preceeded by a ‘.’ character, and contain only numeric characters.
Action: Correct the file name specification.
ORA-15123: ASM file name ‘string’ contains an invalid incarnation number
Cause: A numeric file name was specified which did not contain a valid ASM incarnation number. The ASM incarnation number follows immediately after the ASM file number. It must be preceeded by a ‘.’ character, and contain only numeric characters.
Action: Correct the file name specification.
ORA-15124: ASM file name ‘string’ contains an invalid alias name
Cause: A file name was specified which did not contain a valid ASM alias name. The ASM alias name, if present, follows immediately after the diskgroup name, in place of the ASM file number. It must be preceeded by a slash, start with an alphabetic character, and consist of up to 48 characters which are alphabetic, numeric, or the characters ‘$’, ‘_’, ‘-‘, or ‘#”. A space can separate two parts of an alias name.
Action: Correct the file name specification.

ORA-15125: ASM file name ‘string’ contains an invalid template name
Cause: A file name was specified to ASM which did not contain a valid template name. The template name, if present, follows immediately after the ASM incarnation number or the ASM alias name, if such is used in place of the ASM file number. It must be enclosed in parenthesis, start with an alphabetic character, and consist of up to 30 characters which are alphabetic, numeric, or the characters ‘$’ and ‘_’.
Action: Correct the file name specification.
ORA-15126: component within ASM file name ‘string’ exceeds maximum length
Cause: The maximum identifier length of 30 characters was exceeded for the diskgroup name, template name, or alias name field within the ASM file name.
Action: Correct the file name specification.
ORA-15127: ASM file name ‘string’ cannot use templates
Cause: A fully qualified ASM file name was specified. Such a specification does not permit the inclusion of a template name in the ASM file name.
Action: Correct the file name specification.
ORA-15128: ASM file name ‘string’ exceeds maximum length string
Cause: The maximum ASM file name length of 256 characters was exceeded for the combination of diskgroup name, file number, template name, alias name plus punctuation within the ASM file name.
Action: Correct the file name specification.

Above are list of Oracle Database Errors or Warnings from Error ORA-15117 to ORA-15128 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15106 to ORA-15116

SQLServerF1

ORA-15106: missing or invalid operating system disk locator string
Cause: The command did not specify a valid operating system path for the device as a string.
Action: Specify a valid operating system path for the device.
ORA-15107: missing or invalid ASM disk name
Cause: The command did not specify a valid ASM disk name identifier.
Action: Specify a valid ASM disk name identifier.
ORA-15108: missing or invalid template name
Cause: The command did not specify a valid template name identifier.
Action: Specify a valid template name identifier.

ORA-15109: conflicting protection attributes specified
Cause: The command contained an invalid combination of the UNPROTECTED, MIRROR, or PARITY keywords.
Action: Specify only one keyword.
ORA-15110: no diskgroups mounted
Cause: No diskgroups were specified in the ASM_DISKGROUPS parameter, so instance startup or the ALTER DISKGROUP ALL MOUNT command did not mount any diskgroups.
Action: Specify valid diskgroups in the ASM_DISKGROUPS parameter or ignore the error.
ORA-15111: conflicting or duplicate STRIPE options
Cause: The command contained both a FINE and COARSE keyword, or contained the FINE keyword more than once, or contained the COARSE keyword more than once.
Action: Specify only one keyword.

ORA-15112: no diskgroups currently mounted
Cause: An ALTER DISKGROUP ALL command did not find any mounted diskgroups upon which to operate. Either instance shutdown or an ALTER DISKGROUP ALL DISMOUNT command did not dismount any diskgroups, or an ALTER DISKGROUP ALL UNDROP DISKS command did not undrop any disks.
Action: Mount the diskgroups on which you wish to operate or ignore the error.
ORA-15113: alias name ‘string’ refers to a directory
Cause: The name specified referred to a directory in the alias directory and not a valid alias entry.
Action: Check the alias name and retry.
ORA-15114: missing or invalid ASM file name
Cause: The command did not specify a valid ASM file name identifier.
Action: Specify a valid ASM file name identifier.
ORA-15115: missing or invalid ASM disk size specifier
Cause: The command did not specify a valid ASM disk size.
Action: Specify a valid ASM disk size.
ORA-15116: invalid combination of ALTER DISKGROUP options
Cause: The ALTER DISKGROUP options may not be combined in this manner.
Action: Issue separate ALTER DISKGROUP commands to accomplish the desired action.

Above are list of Oracle Database Errors or Warnings from Error ORA-15106 to ORA-15116 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15096 to ORA-15105

SQLServerF1

ORA-15096: lost disk write detected
Cause: A failure either by disk hardware or disk software caused a disk write to to be lost, even though ASM received acknowledgement that the write completed. Alternatively, a clustering hardware failure or a clustering software failure resulted in an ASM instance believing that another ASM instance had crashed, when in fact it was still active.
Action: The disk group is corrupt and cannot be recovered. The disk group must be recreated, and its contents restored from backups.
ORA-15097: cannot SHUTDOWN ASM instance with connected RDBMS instance
Cause: A SHUTDOWN command was issued to an ASM instance that had one or more connected RDBMS instances.
Action: Connect to each RDBMS instance and shut it down, and then reissue the SHUTDOWN command to the ASM instance. Alternatively, use the SHUTDOWN ABORT command. Note that issuing the SHUTDOWN ABORT command to an ASM instance results in abormal termination of all RDBMS instances connected to that ASM instance.
ORA-15098: file type not recognized by ASM instance
Cause: An attempt was made by DB instance to create a file for a file type that is not recognized by current version of ASM instance.
Action: Upgrade ASM to higher version that recognizes this file type.

ORA-15099: disk ‘string’ is larger than maximum size of string MBs
Cause: The specified size of the disk was too big to allow the disk to become part of the diskgroup.
Action: Specify a smaller disk size than the maximum allowed size.
ORA-15100: invalid or missing diskgroup name
Cause: The command did not specify a valid diskgroup name.
Action: Specify a valid diskgroup name.
ORA-15101: no action specified
Cause: The ALTER DISKGROUP command did not specify any alterations.
Action: Specify at least one operation clause.

ORA-15102: invalid POWER expression
Cause: The syntax of the POWER expression was invalid.
Action: Specify a valid POWER expression.
ORA-15103: conflicting or duplicate REPAIR options
Cause: The command specified conflicting or duplicate REPAIR keywords.
Action: Specify only one REPAIR action.
ORA-15104: conflicting CONTENTS options
Cause: The command specified conflicting or duplicate INCLUDING CONTENTS or EXCLUDING CONTENTS options.
Action: Specify only one option.
ORA-15105: missing or invalid FAILGROUP name
Cause: The command did not specify a valid failure group name.
Action: Specify a valid failure group name.

Above are list of Oracle Database Errors or Warnings from Error ORA-15096 to ORA-15105 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15080 to ORA-15095

SQLServerF1

ORA-15080: synchronous I/O operation to a disk failed
Cause: A synchronous I/O operation invoked on a disk has failed.
Action: Make sure that all the disks are operational.
ORA-15081: failed to submit an I/O operation to a disk
Cause: A submission of an I/O operation to a disk has failed.
Action: Make sure that all the disks are operational.
ORA-15082: ASM failed to communicate with database instance
Cause: There was a failure when ASM tried to communicate with a database instance (most likely because the connection went down).
Action: Check the accompanying error messages for more information on the reason for the failure. Note that the ASM instances may return this error when a database instance is terminated abnormally.

ORA-15083: failed to communicate with ASMB background process
Cause: A database instance failed to communicate with its ASMB background process when attempting to access an ASM file.
Action: Check the alert log for more information on the reason for the failure.
ORA-15084: ASM disk “string” is offline and cannot be dropped.
Cause: An attempt was made to drop a disk that is offline.
Action: Check the ASM disk name as specified in the command; or, if needed, use the DROP DISK FORCE option.
ORA-15090: handle string is not a valid descriptor
Cause: The file handle was not valid in this session.
Action: Submit a handle obtained from a successful call to DBMS_DISKGROUP.OPEN().

ORA-15091: operation incompatible with open handle in this session
Cause: The current session contained an open handle from the DBMS_DISKGROUP PL/SQL package which precluded performing the command.
Action: Close the hanlde with DBMS_DISKGROUP.CLOSE() before executing the command, or execute the command in a different session.
ORA-15092: I/O request size string is not a multiple of logical block size string
Cause: The length of the request was not a multiple of logical block size.
Action: Correct the error and retry the operation.
ORA-15093: buffer only contains string bytes, I/O requested is string bytes
Cause: The buffer supplied for write was too small to satisfy the request.
Action: Correct the error and retry the operation.
ORA-15094: attempted to write to file opened in read only mode
Cause: The file handle passed to DBMS_DISKGROUP.WRITE() did not have write privileges.
Action: Obtain a file handle in read-write mode and retry the write operation.
ORA-15095: reached maximum ASM file size (string GB)
Cause: An ASM file creation or file resize operation exceeded the maximum file size permitted by ASM.
Action: Use smaller files.

Above are list of Oracle Database Errors or Warnings from Error ORA-15080 to ORA-15095 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15069 to ORA-15079

SQLServerF1

ORA-15069: ASM file ‘string’ not accessible; timed out waiting for lock
Cause: An attempt was made to access an ASM file, but the file is currently being created, resized, or deleted and therefore cannot be accessed.
Action: No action required, or try again later, after the create or resize has completed.
ORA-15070: maximum number of files string exceeded in diskgroup “string”
Cause: The diskgroup ran out of space.
Action: Delete some existing ASM files or create files in a new diskgroup.
ORA-15071: ASM disk “string” is already being dropped
Cause: An attempt was made to drop a disk from a diskgroup that was already in the process of being dropped from the diskgroup. Alternatively, an attempt was made to forcibly drop a disk from a diskgroup using the FORCE option that was already being forcibly dropped from the diskgroup.
Action: Check the ASM disk name and FORCE option as specified in the command.

ORA-15072: command requires at least string failure groups, discovered only string
Cause: An attempt was made to create either a normal redundancy diskgroup for which fewer than two failure groups were both specified and discovered, or a high redundancy diskgroup for which fewer than three failure groups were both specified and discovered.
Action: Check the that the command does specify the required number of failure groups, and that all of the specified disks are discovered by ASM. A query of the V$ASM_DISK fixed view will show which disks are discovered by ASM.
ORA-15073: diskgroup string is mounted by another ASM instance
Cause: An attempt was made to drop a diskgroup that is still mounted somewhere in the cluster by another instance.
Action: dismount the diskgroup from all nodes except the one performing the drop diskgroup command.
ORA-15074: diskgroup string requires rebalance completion
Cause: An attempt was made to repeatedly add or drop disks from a diskgroup. ASM could not perform the operation given the current state of the diskgroup.
Action: Manually invoke the ALTER DISKGROUP REBALANCE command and allow the rebalance to run to completion. Alternatively, invoke the ALTER DISKGROUP UNDROP DISKS command and allow the rebalance to run to completion. After the rebalance has completed, retry the operation.

ORA-15075: disk(s) are not visible cluster-wide
Cause: An ALTER DISKGROUP ADD DISK command specified a disk that could not be discovered by one or more nodes in a RAC cluster configuration.
Action: Determine which disks are causing the problem from the GV$ASM_DISK fixed view. Check operating system permissions for the device and the storage sub-system configuration on each node in a RAC cluster that cannot identify the disk.
ORA-15076: Emulating I/O errors on the OSM disk
Cause: The disk to which the I/O request was issued is in an error emulation mode.
Action: Bring the disk online for I/Os to get through.
ORA-15077: could not locate ASM instance serving a required diskgroup
Cause: The instance failed to perform the specified operation because it could not locate a required ASM instance.
Action: Start an ASM instance and mount the required diskgroup.
ORA-15078: ASM diskgroup was forcibly dismounted
Cause: The diskgroup to which the I/O request was issued was forcibly dismounted (with the ALTER DISKGROUP DISMOUNT FORCE command) so that it could not be accessed.
Action: Mount the diskgroup to allow access again.
ORA-15079: ASM file is closed
Cause: The file to which the I/O request was issued was closed. This could have been a consequence of the diskgroup being dismounted.
Action: Make sure the diskgroup is mounted and the file is open.

 

Above are list of Oracle Database Errors or Warnings from Error ORA-15069 to ORA-15079 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-15059 to ORA-15068

SQLServerF1

ORA-15059: invalid device type for ASM disk
Cause: The device type of the discovered disk was not valid for use as an ASM disk.
Action: Check the file path and retry or exclude it from the discovery set. See the accompanying operating system error for additional information.
ORA-15060: template “string” does not exist
Cause: A command specified a template name, either directly or as part of an ASM file name, which did not exist.
Action: Check the template specifier in the command.
ORA-15061: ASM operation not supported [string]
Cause: An ASM operation was attempted that is invalid or not supported by this version of the ASM instance.
Action: This is an internal error code that is used for maintaining compatibility between software versions and should never be visible to the user; contact Oracle support Services.

ORA-15062: ASM disk is globally closed
Cause: The disk to which the I/O request was issued has gone offline or has been globally closed by the background process. Check other messages in the trace files for more information.
Action: Bring the disk online for I/Os to get through.
ORA-15063: ASM discovered an insufficient number of disks for diskgroup “string”
Cause: ASM was unable to find a sufficient number of disks belonging to the diskgroup to continue the operation.
Action: Check that the disks in the diskgroup are present and functioning, that the owner of the ORACLE binary has read/write permission to the disks, and that the ASM_DISKSTRING initialization parameter has been set correctly. Verify that ASM discovers the appropriate disks by querying V$ASM_DISK from the ASM instance.
ORA-15064: communication failure with ASM instance
Cause: There was a failure to communicate with the ASM instance, most likely because the connection went down.
Action: Check the accompanying error messages for more information on the reason for the failure. Note that database instances will always return this error when the ASM instance is terminated abnormally.

ORA-15065: hash collision for diskgroup names ‘string’ and ‘string’
Cause: There was a collision in the group name used for the diskgroup. The diskgroup(s) cannot be mounted using colliding names.
Action: Use a different diskgroup name and also report to Oracle Support Services the two diskgroup names which collided.
ORA-15066: offlining disk “string” may result in a data loss
Cause: Following I/O failures, the disks holding all copies of a data block were attempted to be taken offline.
Action: Check the accompanying error messages for more information on the reason for the disk I/O failures.
ORA-15067: command or option incompatible with diskgroup redundancy
Cause: An attempt was made to use a feature which is not permitted by the diskgroup’s redundancy policy. Common examples are forcibly dropping a disk from an EXTERNAL REDUNDANCY diskgroup, using the FAILGROUP clauses with an EXTERNAL REDUNDANCY diskgroup, or using invalid template attributes.
Action: Omit the option from the command.
ORA-15068: maximum number of diskgroups string already mounted
Cause: An attempt was made to mount more diskgroups than the instance is capable of mounting at one time.
Action: Dismount a mounted diskgroup and retry the command.

Above are list of Oracle Database Errors or Warnings from Error ORA-15059 to ORA-15068 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 
1 2 3 5