Oracle Database Errors or Warnings from Error ORA-08101 to ORA-08110

SQLServerF1

 

ORA-08101: index key does not exist file string: (root string, node string) blocks (string)
Cause: Internal error: possible inconsistency in index
Action: Send trace file to your customer support representative, along with information on reproducing the error
ORA-08102: index key not found, obj# string, file string, block string (string)
Cause: Internal error: possible inconsistency in index
Action: Send trace file to your customer support representative, along with information on reproducing the error
ORA-08103: object no longer exists
Cause: The object has been deleted by another user since the operation began, or a prior incomplete recovery restored the database to a point in time during the deletion of the object.
Action: Delete the object if this is the result of an incomplete recovery.
ORA-08104: this index object string is being online built or rebuilt
Cause: the index is being created or rebuild or waited for recovering from the online (re)build
Action: wait the online index build or recovery to complete
ORA-08105: Oracle event to turn off smon cleanup for online index build
Cause: set this event only under the supervision of Oracle development
Action: debugging only
ORA-08106: cannot create journal table string.string
Cause: The online index builder could not create its journal table
Action: rename your table in conflict or rerun the SQL statement
* there may be a concurrent online index rebuild on the same object.
ORA-08108: may not build or rebuild this type of index online
Cause: only support normal index or IOT top-level index
Action: change your index type
ORA-08109: nosort is not a supported option for online index build
Cause: may not specify nosort for online index build
Action: get rid of nosort in the index creation command
ORA-08110: Oracle event to test SMON cleanup for online index build
Cause: Oracle Kernel test only
Action: Donot set this event(for test only)

Above are list of Oracle Database Errors or Warnings from Error ORA-08101 to ORA-08110 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-08002 to ORA-08100

SQLServerF1

 

ORA-08002: sequence string.CURRVAL is not yet defined in this session
Cause: sequence CURRVAL has been selected before sequence NEXTVAL
Action: select NEXTVAL from the sequence before selecting CURRVAL
ORA-08003: sequence string.NEXTVAL exceeds internal limits
Cause: The sequence was created with unsafe values for some of the parameters. The calculation of NEXTVAL cannot be made because it exceeds the legal represention size.
Action: Alter or recreate the sequence number with legal limits.

ORA-08004: sequence string.NEXTVAL string stringVALUE and cannot be instantiated
Cause: instantiating NEXTVAL would violate one of MAX/MINVALUE
Action: alter the sequence so that a new value can be requested
ORA-08005: specified row does not exist
Cause: A row with the given rowid does not exist in any of the tables given
Action: check the query for misspellings of table names and the rowid
ORA-08006: specified row no longer exists
Cause: the row has been deleted by another user since the operation began
Action: re-try the operation

ORA-08007: Further changes to this block by this transaction not allowed
Cause: Max locks have been reached for this transaction in this block
Action: Commit changes
ORA-08008: another instance is mounted with USE_ROW_ENQUEUES = string
Cause: the shared instance being started does not have the same value for use_row_enqueues as already running instances
Action: ensure that all instances’ INIT.ORA files specify the same value for the parameter ‘use_row_enqueues’
ORA-08100: index is not valid – see trace file for diagnostics
Cause: Validate Index detected an inconsistency in its argument index
Action: Send trace file to your customer support representative

Above are list of Oracle Database Errors or Warnings from Error ORA-08002 to ORA-08100 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07846 to ORA-08000

SQLServerF1

 

ORA-07846: sllfop: string byte record too big for string byte user buffer
Cause: The longest record in the file will not fit into the largest data buffer that can be allocated
Action: Modify the RMS file to have smaller records
ORA-07847: sllfop: $CONNECT failure
Cause: An error was returned by SYS$CONNECT while attempting to open the data file
Action: Check system error and refer to VMS documentation
ORA-07848: sllfrb: $GET failure

Cause: An error was returned by SYS$GET while attempting to read the data file
Action: Check system error and refer to VMS documentation
ORA-07849: sllfsk: $GET failure
Cause: An error was returned by SYS$GET while attempting to skip records in the input file
Action: Check system error and refer to VMS documentation
ORA-07850: sllfop: bad option
Cause: You are using a bad option to loader Fixed= is one legal option. Check documentation for others.

Action: Check documentation
ORA-07860: osnsoi: error setting up interrupt handler
Cause: An error occurred while setting up the control interrupt handler
Action: This is an internal error. Contact your Oracle representative.
ORA-07880: sdopnf: internal error
Cause: A list of all files open by this process could not be obtained.
Action: This is an internal error. Contact your customer support representative.
ORA-08000: maximum number of session sequence lists exceeded
Cause: the sequence parent state objects for this session are all used
Action: an internal error; quit the session and begin a new one

Above are list of Oracle Database Errors or Warnings from Error ORA-07846 to ORA-08000 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07825 to ORA-07845

SQLServerF1

 

ORA-07825: sspsck: $QIO failure at AST level
Cause: An error was returned from SYS$QIO while trying to read the process dump mailbox.
Action: Check system error and refer to VMS documentation
ORA-07826: sspscm: SYS$GETDVIW failure
Cause: An error was returned from SYS$GETDVIW while trying to get information about the process dump mailbox.
Action: Check system error and refer to VMS documentation
ORA-07840: sllfop: LIB$GET_VM failure
Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for an i/o vector.

Action: Check system error and refer to VMS documentation
ORA-07841: sllfop: SYS$OPEN failure
Cause: An error was returned from SYS$OPEN while attempting to open the data file for reading
Action: Check system error and refer to VMS documentation
ORA-07842: sllfcl: SYS$CLOSE failure
Cause: An error was returned from SYS$CLOSE while attempting to close the input data file
Action: Check system error and refer to VMS documentation

ORA-07843: sllfcl: LIB$FREE_VM failure
Cause: An error was returned from LIB$FREE_VM while attempting to free the memory for the i/o vector
Action: Check system error and refer to VMS documentation
ORA-07844: sllfop: LIB$GET_VM failure
Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for data and index buffers
Action: Check system error and refer to VMS documentation
ORA-07845: sllfcl: LIB$FREE_VM failue
Cause: An error was returned from LIB$FREE_VM while attempting to free memory used by data and index buffers
Action: Check system error and refer to VMS documentation

Above are list of Oracle Database Errors or Warnings from Error ORA-07825 to ORA-07845 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07800 to ORA-07824

SQLServerF1

 

ORA-07800: slbtpd: invalid number
Cause: An impossible request for binary to decimal conversion was made
Action: This conversion cannot be performed
ORA-07801: slbtpd: invalid exponent
Cause: An impossible request for binary to decimal conversion was made
Action: This conversion cannot be performed
ORA-07802: slbtpd: overflow while converting to packed decimal
Cause: An impossible request for binary to decimal conversion was made
Action: This conversion cannot be performed

ORA-07803: slpdtb: invalid packed decimal nibble
Cause: An impossible request for decimal to binary conversion was made
Action: This conversion cannot be performed
ORA-07804: slpdtb: number too large for supplied buffer
Cause: An impossible request for decimal to binary conversion was made
Action: This conversion cannot be performed
ORA-07820: sspscn: SYS$CRELNM failure
Cause: An error was returned from the SYS$CRELNM function
Action: Check system error and refer to VMS documentation

ORA-07821: sspsdn: SYS$DELLNM failure
Cause: An error was returned from the SYS$DELLNM function
Action: Check system error and refer to VMS documentation
ORA-07822: sspscm: SYS$CREMBX failure
Cause: An error was returned from the SYS$CREMBX function while trying to create the process dump mailbox.
Action: Check system error and refer to VMS documentation
ORA-07823: sspsqr: $QIO failure
Cause: An error was returned from $QIO while trying to queue a read to the process dump mailbox.
Action: Check system error and refer to VMS documentation
ORA-07824: sspain: $SETIMR failure
Cause: An error was returned from SYS$SETIMR while trying to queue a process spin-watch timer.
Action: Check system error and refer to VMS documentation

Above are list of Oracle Database Errors or Warnings from Error ORA-07800 to ORA-07824 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07751 to ORA-07760

SQLServerF1

 

ORA-07751: slemcr: mallocc failure
Cause: An attempt to allocate a cache for a newly-created message file failed. This is an internal error.
Action: Contact your customer support representative.
ORA-07753: slemcf: fseekk before write failure
Cause: An attempt to seek before writing a message file cache element failed. This is an internal error.
Action: Contact your customer support representative.
ORA-07754: slemcf: fwritee failure
Cause: An attempt to write a message file cache element failed. This is an internal error.
Action: Contact your customer support representative.

ORA-07755: slemcf: fseekk before read failure
Cause: An attempt to seek before reading a message file cache element failed. This is an internal error.
Action: Contact your customer support representative.
ORA-07756: slemcf: fread failure
Cause: An attempt to read a message file cache element failed. This is an internal error.
Action: Contact your customer support representative.
ORA-07757: slemcc: invalid handle
Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
Action: Contact your customer support representative.

ORA-07758: slemcw: invalid handle
Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
Action: Contact your customer support representative.
ORA-07759: slemtr: invalid destination
Cause: The destination string provided to the function is too short This is an internal error.
Action: Contact your customer support representative.
ORA-07760: slemtr: $openn failure
Cause: the $openn service failed. This is an internal error
Action: Contact your customer support representative.

Above are list of Oracle Database Errors or Warnings from Error ORA-07751 to ORA-07760 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07741 to ORA-07750

SQLServerF1

 

ORA-07741: slemop: $OPEN failure
Cause: VMS system service $OPEN failed
Action: Examine system error message and refer to VMS documentation
ORA-07742: slemop: $CONNECT failure
Cause: VMS system service $CONNECT failed
Action: Examine system error message and refer to VMS documentation
ORA-07743: slemop: incorrect error file attributes

Cause: An error message file is of incorrect format
Action: Unless an error file has been changed, report this to Oracle
ORA-07744: slemcl: invalid error message file handle
Cause: seal in passed in handle does not match correct value
Action: this is an internal error, please report to Oracle
ORA-07745: slemcl: $CLOSE failure
Cause: VMS system service $CLOSE failed
Action: Check system error and refer to VMS documentation

ORA-07746: slemrd: invalid error message file handle
Cause: seal in passed in handle does not match correct value
Action: this is an internal error, please report to Oracle
ORA-07747: slemrd: $READ failure
Cause: VMS system service $READ failed
Action: Check system error and refer to VMS documentation
ORA-07750: slemcr: fopen failure
Cause: An attempt to create a message file failed. This is an internal error.
Action: Contact your customer support representative.

Above are list of Oracle Database Errors or Warnings from Error ORA-07741 to ORA-07750 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07713 to ORA-07740

SQLServerF1

 

ORA-07713: sksamtd: could not mount archival device (SYS$MOUNT failure)
Cause: VMS system service SYS$MOUNT failed
Action: Examine system error message and refer to VMS documentation
ORA-07715: sksadtd: could not dismount archival device (SYS$DISMNT failure)
Cause: VMS system service SYS$DISMNT failed
Action: Examine system error message and refer to VMS documentation

ORA-07716: sksachk: invalid device specification for ARCHIVE
Cause: VMS system service SYS$GETDVI failed”
Action: Specify a valid device in ARCHIVE control string
ORA-07717: sksaalo: error allocating memory
Cause: VMS system service LIB$GET_VM failed”
Action: Examine system error message and refer to VMS documentation

ORA-07718: sksafre: error freeing memory
Cause: VMS system service LIB$FREE_VM failed
Action: Examine system error message and refer to VMS documentation
ORA-07721: scgcm: not enough OS resource to obtain system enqueue
Cause: d by the messages SS$_EXENQLM or SS$_INSFMEM.
Action: Free up some of the required resource to allow the creation of the required lock.
ORA-07740: slemop: incorrect handle size (programming error)
Cause: structures used for reading error message files do not match
Action: this is an internal error, please report to Oracle

Above are list of Oracle Database Errors or Warnings from Error ORA-07713 to ORA-07740 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07701 to ORA-07710

SQLServerF1

 

ORA-07701: sksatln: internal exception: output buffer too small
Cause: Overflow of buffer for parsing archive control text string
Action: This is an internal error, please report to Oracle
ORA-07702: unrecognized device type in archive text
Cause: Unrecognized device type in archive text
Action: This is an internal error, please report to Oracle
ORA-07703: error in archive text: need ‘/’ after device type
Cause: The archive control text in the ARCHIVE command is invalid; the device type (to indicate a file or tape) must be followed by a ‘/’.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.

ORA-07704: error in archive text: need ‘:’ after device name
Cause: The archive control text in the ARCHIVE command is invalid; the device name must be followed by a ‘:’.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.
ORA-07705: sksaprs: device name buffer too small
Cause: The buffer supplied for the device name is too small. This is an internal error.
Action: Contact your customer support representative.
ORA-07706: error in archive text: need disk file name
Cause: The archive control text in the ARCHIVE command is invalid; the disk file name is missing.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.

ORA-07707: error in archive text: need tape label name
Cause: The archive control text in the ARCHIVE command is invalid; the tape label name is missing.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.
ORA-07708: sksaprs: tape label name buffer too small
Cause: The buffer supplied for the tape label is too small. This is an internal error.
Action: Contact your customer support representative.
ORA-07709: sksaprs: archiving to a remote host is not allowed
Cause: The user specified a remote disk for archiving via DECnet.
Action: Archive to a disk on the local host.
ORA-07710: sksaprs: file name buffer too small
Cause: The buffer supplied for the file name is too small. This is an internal error.
Action: Contact your customer support representative.

Above are list of Oracle Database Errors or Warnings from Error ORA-07701 to ORA-07710 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 

Oracle Database Errors or Warnings from Error ORA-07671 to ORA-07700

SQLServerF1

 

ORA-07671: $IDTOASC failed translating an integrity category
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of an integrity category.
Action: Define the entry in the rights database which the binary label you specified references.
ORA-07672: $PARSE_CLASS failed translating the string into a binary label
Cause: SEVMS system service $PARSE_CLASS failed because the given string did not represent a valid classification.
Action: Examine system error message and refer to SEVMS documentation.
ORA-07680: sou2os: another call to Oracle currently executing
Cause: A call to the Oracle shared image entry point occurred from within the shared image. This is an internal error.
Action: Contact your customer support representative.

ORA-07681: sou2os: An error occurred while initializing Oracle
Cause: While attempting to set up the dispatch vectors for the shared image, an error occurred. This is an internal error.
Action: Contact your customer support representative.
ORA-07682: sou2os: set kernel dispatch fail err
Cause: During Oracle shared image entry, a dispatch to kernel mode failed.
Action: Make sure that your shared image is installed with the CMKRNL privilege, then contact your customer support representative.
ORA-07683: sou2os: $SETPRV reset error
Cause: During an attempt to restore user privileges at Oracle shared image exit, VMS system service $SETPRV failed. This is an internal error.
Action: Contact your customer support representative.

ORA-07684: sou2os: supervisor stack reset error
Cause: During an attempt to restore the supervisor-mode stack at Oracle shared image exit, VMS system service $SETSTK failed. This is an internal error.
Action: Contact your customer support representative.
ORA-07685: sou2os: supervisor stack set error
Cause: During an attempt to set the Oracle supervisor-mode stack at Oracle shared image entry, VMS system service $SETSTK failed. This is an internal error.
Action: Contact your customer support representative.
ORA-07700: sksarch: interrupt received
Cause: An interrupt was received while archiving the logs
Action: Retry operation

Above are list of Oracle Database Errors or Warnings from Error ORA-07671 to ORA-07700 received while performing certain operation against Oracle Database or related products.

What are Oracle Database Error Messages?

Oracle Error Messages may be returned while using products which are part of Oracle Database.  Each Oracle Database Error or Warning Message mentioned above contains the Warning or Error Message Statement, a short explanation of the probable causes of the Error message, and a recommended action.

Hope this was helpful.

Thanks,
SQLServerF1 Team
Information about Oracle Database Error Messages or Warning Messages on Windows and Linux Operating Systems.

 
1 2 3 4 5 52