Symantec NetBackup status code 2061 to status code 2065

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 2061 to Status Code 2065 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 2061
Message: The host is not an active node of a cluster
Explanation: A cluster failover has occurred while a job is running. A job may be
waiting for a span on a media server that has failed over.
Recommended Action: Restart the failed job.

NetBackup status code: 2062
Message: Throttled job count has been reached for the storage unit
Explanation: This error will never be returned as a job status.

NetBackup status code: 2063
Message: Server is not licensed for the Remote Client Option
Explanation: The media server required for this job does not have the Remote
Client Option enabled. A SAN media server is asked to back up a client that is not
also a media server, or a VMware backup is tried on a SAN media server.
Recommended Action: Back up this client on a media server that is licensed to
do so. Verify that the media server has connectivity to the master server when
adding its licenses.

NetBackup status code: 2064
Message: Job history indicates that no media is available
Explanation: When a job is run on a media server that is installed with pre
NetBackup 6.0 software, there are some situations where the job starts, but media
is not available for the job. In this case, the master server stops using that storage
unit for a period of time (12 hours), and returns this error for jobs requested the
storage unit.
Recommended Action: Make sure that media is available for the storage unit.
Add media if necessary. If media is available, wait 12 hours until the storage unit
can be used again. To make the storage unit immediately usable, run the following
command on the master server to release:
Recommended Action: nbrbutil -releaseAllocHolds

NetBackup status code: 2065
Message: Job history indicates that no drive is available
Explanation: When a job is run on a media server that is installed with pre
NetBackup 6.0 software, there are some situations where the job starts, but the
drives that are designated for the job are busy or otherwise unavailable, causing
the job to fail. In this case, the NetBackup master server stops using that drive
for a period of time (several minutes), and returns this error for jobs requesting
that drive.
Recommended Action: Make sure all of the drives in the storage unit are up and
available for use. Clean all drives that need cleaning.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 2056 to status code 2060

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 2056 to Status Code 2060 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 2056
Message: The file name used for the mount request already exists
Explanation: The tpreq command cannot load this media because the specified
file name already exists.
Recommended Action: Specify a different file name for tpreq, or run the
tpunmount command for the media which has been loaded using tpreq with the
conflicting file name.

NetBackup status code: 2057
Message: The scan host of the drive is not active
Explanation: The scan host for a standalone drive is offline, so the drive cannot
be allocated .
Recommended Action: If the problem persists, restart the NetBackup media
servers that have paths to this drive.

NetBackup status code: 2058
Message: LTID needs to be restarted on media servers before the device can be
used
Explanation: A drive cannot be used because an ltid restart is required. This
error may occur when configuration changes have been made on a media server,
but ltid has not been subsequently restarted.
Recommended Action: When the media server is not in a busy state, stop and
restart ltid on that media server.

NetBackup status code: 2059
Message: The robotic library is not available
Explanation: The robot that is required for a drive cannot be found in the nbemm
database.
Recommended Action: Verify that the robot that is required by jobs is properly
configured. If the error persists, the following logs may be useful in understanding
the problem : The mds unified logging files (OID 143) from the master server at
debug level 2.

NetBackup status code: 2060
Message: Media needs to be rewound or unmounted from a drive
Explanation: The NetBackup mds component uses this error internally to inform
the resource broker that a tape needs to be unloaded. It should never appear as a
job error status.
Recommended Action:

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 2051 to status code 2055

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 2051 to Status Code 2055 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 2051
Message: ACS media is not in the drive’s domain
Explanation: Media that is required for this job is in an ACS robot that is not
accessible.
Recommended Action: Verify that the robot that contains the required media is
accessible to a NetBackup media server.
For more information, refer to the section on configuring ACSLS robots in the
NetBackup Device Configuration Guide.

NetBackup status code: 2052
Message: An ACS Library Storage Module (LSM) is offline
Explanation: The required ACS LSM is offline.
Recommended Action: Bring the ACS LSM online.
For more information, refer to the section on configuring ACSLS robots in the
NetBackup Device Configuration Guide.

NetBackup status code: 2053
Message: Media is in an inaccessible drive
Explanation: The required media is currently loaded in a DOWN or otherwise
inaccessible drive.
RecommendedAction: Locate the media and correct the problem that has caused
the drive or drive path to be down.

NetBackup status code: 2054
Message: Media is in a drive that is currently in a DOWN state
Explanation: Required media is currently loaded in a drive that is down.
RecommendedAction: Locate the media and correct the problem that has caused
the drive or drive path to be downed.

NetBackup status code: 2055
Message: ACS physical drive is not available
Explanation: The media server cannot load ACS media because a drive is not
available.
Recommended Action:

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 
1 3 4 5