Symantec NetBackup status code 1546 to status code 1552

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1546 to Status Code 1552 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1546
Message: Capacity managed retention type is not compatible with SLP operations
Explanation: Capacity managed retention has been chosen as the retention type
for an SLP operation. That retention type does not support the SLP operations.
RecommendedAction: Choose a different SLP that is compatible with the schedule
type.

NetBackup status code: 1547
Message: Expire after copy retention requires a dependent copy
Explanation: When the retention type for an SLP operation is expire after copy,
a dependent copy for that operation must use the expire after copy operation as
its source.
RecommendedAction: No operations can be performed on this snapshot. Expire
it from the catalog.

NetBackup status code: 1548
Message: Retention type is not compatible with snapshot operation
Explanation: The retention type that you selected for the snapshot operation in
an SLP is not supported for snapshots.
Recommended Action: Choose a different retention type.

NetBackup status code: 1549
Message: TIR information selection is not compatible with SLP operations
Explanation: The backup policy has TIR information collection enabled and uses
an SLP as its storage destination. One or more of the operations in the SLP do not
support TIR information collection.
Recommended Action: Do one of the following:
¦ Remove the TIR information selection from the backup policy.
¦ Choose a different SLP to use with the backup policy.

NetBackup status code: 1552
Message: The source and target storage units are not valid replication partners.
Explanation: The nbstl command has configured the lifecycle policy. One of the
following is true:
¦ The target storage unit or group that is specified for the replication operation
is not a replication partner for the source storage unit or group.
¦ Explanation: Volumes that are configured in the target storage unit or group
are not replication targets for the volumes that are configured in the source
storage unit or group.
¦ You use the fully qualified name for the storage server. The storage server
creation process requires the short version of the name as displayed in the
bpstsinfo -li output.
Recommended Action: Do one of the following:
Run the following command to get a list of matching target storage units or
groups for the given source storage unit or group:
# nbdevquery -listreptargets -stunit source_stu_or_group
¦ Rerun the nbstl command with the target storage unit or group from the list
that the nbdevquery command displays.
¦ Run the bpstsinfo -li command and check the output for the storage server
name. The name that you use to create the storage server must match this
name.
¦ Ensure that NetBackup is configured after the storage server configuration is
complete. If not, use the Change Disk Pool dialog of the NetBackup
Administration Console or the nbdevconfig -updatedp command to refresh
each disk pool of the storage server.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1539 to status code 1545

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1539 to Status Code 1545 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1539
Message: Backup policy generates snapshots but storage lifecycle policy does not
handle them
Explanation: The backup policy generates snapshots because you have selected
the Perform snapshot backups and the Retain snapshot for Instant Recovery
orSLPmanagement on the ChangePolicy dialog box. The referenced SLP cannot
process snapshots because it does not include a Snapshot operation.
Recommended Action: Do one of the following:
¦ Change the backup policy to use an SLP that provides snapshot support.
¦ Change the backup policy so it does not generate snapshots.
¦ Change the SLP to include a snapshot operation.

NetBackup status code: 1540
Message: SLP expects snapshots but backup policy does not create them with
SLP management enabled
Explanation: The maximum snapshot limit for this policy is reached and no
existing snapshot is eligible for rotation.
RecommendedAction: Find and expire the existing snapshot which is no longer
needed.

NetBackup status code: 1541
Message: Snapshot creation failed
Explanation: The maximum snapshot limit for the policy has been exceeded and
no existing snapshots are eligible for expiration.
Explanation: One of the following is true:
¦ None of the existing snapshot copies is eligible for expiration because all the
copies are in snapshot duplication pending mode.
¦ None of the existing snapshot copies is eligible for expiration, because they
have not yet reached their retention period (fixed retention).
Recommended Action: Do not try to expire a snapshot copy that is still pending
or has not reached its retention period.

NetBackup status code: 1542
Message: An existing snapshot is no longer valid and cannot be mounted for
subsequent operations
Explanation: An existing snapshot has become corrupted or the snapshot no
longer contains all the required data. It cannot be mounted and cannot be used
for any further NetBackup operations, including backup from snapshot or restore.
Any pending SLP operations have been automatically cancelled.
Recommended Action: Run a new backup job to generate a new snapshot.

NetBackup status code: 1543
Message: Policy type is not compatible with SLP operations
Explanation: Policies of the type specified cannot be used with the referenced
SLP because they do not support the SLP operations, including SLP characteristics
such as snapshot operations.
RecommendedAction: Choose a different SLP that is compatible with the policy
type.

NetBackup status code: 1545
Message: Schedule type is not compatible with SLP operations
Explanation: A policy schedule refers to an SLP as its storage destination, but
the schedule type is not compatible with the operations performed by the SLP.
RecommendedAction: Choose a different SLP that is compatible with the schedule
type.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1534 to status code 1538

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1534 to Status Code 1538 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1534
Message: Import failed because the imported image specifies an SLP name with
no import operation
Explanation: The imported image specifies a storage lifecycle policy name that
is not an import storage lifecycle policy and is immediately expired.
RecommendedAction: Use a different storage lifecycle policy name in the source
domain where you configured an Auto Image Replication. This name must match
a storage lifecycle policy name with an import destination in the destination
domain where you have configured the import. The match is case sensitive.

NetBackup status code: 1535
Message: Import failed because the imported image backup id conflicts with an
existing image
Explanation: NetBackup attempted to import an image with a backup id that
already exists in the image catalog.
Recommended Action: Delete the duplicate image from storage because
NetBackup cannot delete it.

NetBackup status code: 1536
Message: The storage unit or storage unit group cannot be deleted because an
SLP references it
Explanation: You cannot delete a storage unit or storage unit group if an SLP
references it. The SLP may be an older version. The NetBackup Administration
Console displays the most recent version of an SLP while the reference to the
storage unit or storage unit group may be located in a earlier version.
Recommended Action: Use the nbstl command to view and change the older
SLP versions. Do the following in the order listed:
¦ Run the following command to display all versions of each SLP:
# nbstl -L -all_versions
¦ Determine the name and version of each SLP that references the storage unit
or storage unit group.
¦ Run the following command to replace the storage unit (group) to be deleted
with the name of a different storage unit.
# nbstl <SLP_name> -modify_version <version_number>…

NetBackup status code: 1537
Message: Backup policy and storage lifecycle policy have conflicting configurations
Explanation: Some of the backup policy characteristics are not compatible with
one of the SLP characteristics that is referenced in the policy attributes or policy
schedules.
Recommended Action: In the NetBackup Administration Console, locate the
Change Storage Lifecycle Policy dialog for the SLP in question. Then run the
Validation Report to display the specific conflicts that pertain to the SLP. Correct
those conflicts.

NetBackup status code: 1538
Message: Data classification in the SLP conflicts with backup policy
Explanation: The Data classification specified in the SLP does not match the data
classification specified in the backup policy.
Recommended Action: Do one of the following:
¦ Change the policy to reference an SLP with a matching data classification
¦ Change the data classification in either the backup policy or the SLP so that
they match.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1531 to status code 1533

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1531 to Status Code 1533 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1531
Message: An import storage lifecycle policy requires one copy with remote
retention type
Explanation: The storage lifecycle policy definition cannot be created or modified
as specified because an imported image must make at least one copy by using the
(imported) remote retention type.
RecommendedAction: Add a destination to the storage lifecycle policy that uses
the remote retention type.
Do one of the following:
¦ Change one of the destinations in the storage lifecycle policy to use the remote
retention type. If the storage lifecycle policy has only one destination that is
an import destination, then it must be a remote retention type.
¦ Add a destination to the storage lifecycle policy which uses the remote retention
type.

NetBackup status code: 1532
Message: Import failed because the imported image specifies an SLP name which
does not exist
Explanation: The image imported does not match any configured storage lifecycle
policy and was immediately expired.
Recommended Action: Do one of the following:
¦ Verify that the storage lifecycle policy in the source domain where you
configured an Auto Image Replication matches the storage lifecycle policy in
the destination domain where you configured the import. The match is case
sensitive.
¦ Add a storage lifecycle policy with an import destination using the same name
as your storage lifecycle policy in the source domain.

NetBackup status code: 1533
Message: Import failed because the imported image data class is different than
the SLP data class
Explanation: The image that is imported has a data classification which does not
match any of the import storage lifecycle policy data classifications and was
immediately expired.
Recommended Action:
Do one of the following:
¦ Change the data classification of the storage lifecycle policy in the source
domain where you configured an Auto Image Replication to match the
following: the data classification in the destination domain where you have
configured the import. The match is case sensitive.
Verify that the storage lifecycle policy in the source domain where you
configured an Auto Image Replication matches the following: the storage
lifecycle policy in the destination domain where you configured the import.
The match is case sensitive.
¦ Change the data classification of the storage lifecycle policy in the destination
domain where you configured an Auto Image Replication to match the
following: the data classification in the source domain where you have
configured the import. The match is case sensitive.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1528 to status code 1530

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1528 to Status Code 1530 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1528
Message: The source copy for an Auto Image Replication is not capable of
replication
Explanation: The storage lifecycle policy definition cannot be created or modified
as specified because you have selected an Auto Image Replication destination that
duplicates a copy not capable of duplication across master servers.
Recommended Action: Do one of the following:
¦ If you use the command line, ensure that you specify the correct storage
lifecycle policy destination index number for the source copy.
Ensure that you use the appropriate indentation to indicate the correct source
storage lifecycle policy destination in the GUI.
¦ Ensure that the source that is specified by either the storage lifecycle policy
destination index on the CLI or by indentation in the GUI uses a storage unit
that is capable of replication. That is, check the properties of the disk volumes
within the disk pool that the storage unit specifies.

NetBackup status code: 1529
Message: The source copy for Auto Image Replication must specify a storage unit
Explanation: The storage lifecycle policy definition cannot be created or modified
as specified because an Auto Image Replication destination is specified which
duplicates a copy that may not be capable of duplication across master servers.
Recommended Action: Do one of the following:
¦ If you use the command line, ensure that you specify the correct storage
lifecycle policy destination index number for the source copy.
¦ Ensure that you use the appropriate indentation to indicate the correct source
storage lifecycle policy destination in the GUI.
¦ Ensure that the source that is specified by either the storage lifecycle policy
destination index on the CLI or by indentation in the GUI uses a storage unit
(not a storage unit group, storage lifecycle policy or Any Available) that is
capable of replication. That is, check the properties of the disk volumes within
the disk pool that the storage unit specifies.

NetBackup status code: 1530
Message: Only one Auto Image Replication allowed per copy
Explanation: The storage lifecycle policy definition cannot be created or modified
as specified because an Auto Image Replication destination is specified which
duplicates a copy which already has an Auto Image Replication specifying it as a
source copy.
Recommended Action: Do one of the following:
¦ If you use the command line, ensure that you specify the correct storage
lifecycle policy destination index number for the source copy.
¦ Ensure that you use the appropriate indentation to indicate the correct source
storage lifecycle policy destination in the GUI.
¦ Ensure that the source that is specified by either the storage lifecycle policy
destination index on the CLI or by indentation in the GUI does not have more
than one Auto Image Replication destination specifying it as its source copy.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1521 to status code 1527

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1521 to Status Code 1527 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1521
Message: Database not available
Explanation: The import manager is not able to access the NetBackup database.
Recommended Action: Do one of the following
¦ Make sure that the database service is running.
¦ Make sure that the disk is not full.

NetBackup status code: 1522
Message: Error executing database query
Explanation: An SQL error is in the import manager.
Recommended Action: Examine the log files for the nbstserv process or
originator ID 369 for more information.

NetBackup status code: 1523
Message: Invalid fragment
Explanation: NetBackup received from a storage device an replication notification
event in an unrecognized format.
Recommended Action: Check the NetBackup Problems Report for details.

NetBackup status code: 1524
Message: Duplicate image record
Explanation: NetBackup received from a storage device a replication notification
event for a backup ID that already exists in the NetBackup catalog.
Recommended Action: Do one of the following:
¦ Check the NetBackup Problems Report for details
¦ Delete the duplicate image from storage because NetBackup cannot do it.

NetBackup status code: 1525
Message: Invalid lsu
Explanation: NetBackup received a replication notification event that indicates
an image exists on an unknown or unconfigured disk volume (LSU).
Recommended Action: Do one of the following:
¦ Configure the LSU as a valid disk volume in a valid disk pool, and create a valid
storage unit for it. Associate this storage unit with an import storage lifecycle
policy.
¦ Reconfigure the replication on your storage devices to use a replication target
disk volume (LSU) that is recognized by NetBackup.

NetBackup status code: 1526
Message: Storage lifecycle policy exceeds maximum import operations
Explanation: The storage lifecycle policy definition cannot be created or modified
as specified because it can contain only one import destination.
RecommendedAction: Configure the storage lifecycle policy with only one import
destination.

NetBackup status code: 1527
Message: storage lifecycle policy can have only one of backup, import, and
snapshot operations
Explanation: The storage lifecycle policy definition cannot be created or modified
as specified because a storage lifecycle policy with an import destination cannot
also have backup or snapshot destinations.
RecommendedAction: Configure the storage lifecycle policy with only one import
destination and additional destinations of type duplication only.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1516 to status code 1519

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1516 to Status Code 1519 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1516
Message: all storage units or groups must be on the same media server
Explanation: The destinations of type Backup specified in storage lifecycle policy
are not accessible by the same media server.
Recommended Action: Verify that all the destinations of type Backup are
accessible by at least one common media server.

NetBackup status code: 1517
Message: Invalid retention level
Explanation: The retention level specified for one or more destinations in storage
lifecycle policy is not valid.
RecommendedAction: Verify that the retention level specified on each destination
in storage lifecycle policy is in the range of 0 to 24.

NetBackup status code: 1518
Message: backup image is not supported by storage lifecycle policy
Explanation: The backup image is un-supported by the configured storage lifecycle
policy.
Recommended Action: Do the following, as appropriate:
¦ Verify that if a NetBackup policy is configured to perform snapshot backups
and uses storage lifecycle policy as its storage destination, then the specified
storage lifecycle policy must be configured with a snapshot destination.
Otherwise, backup images created by those NetBackup policies are not
processed further by storage lifecycle policy for any lifecycle operations.
¦ Verify that NetBackup policies using storage lifecycle policy as a storage
destination are not configured to perform “snapshots-only” operations and
they must create backups in addition to snapshots. Storage lifecycle policy
even though configured with a snapshot destination would perform lifecycle
operations on such images only if they have at least one backup copy.

NetBackup status code: 1519
Message: Images are in process
Explanation: The operation in progress cannot complete because the SLP
processing of the images is not complete.
Recommended Action: Wait until the image processing is done, then retry the
operation. Or, terminate the SLP processing for the needed images.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1508 to status code 1515

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1508 to Status Code 1515 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1508
Message: Storage lifecycle policy exceeds maximum copies
Explanation: The list of destinations specified in storage lifecycle policy exceeds
maximum number of allowed backup copies.
Recommended Action: Do the following, as appropriate:
¦ Verify that the number of destinations specified in storage lifecycle policy
does not exceed maximum backup copies configured in NetBackup.
¦ Modifymaximumbackupcopies to allow the expected number of destinations
in storage lifecycle policy or reduce the number of destinations to not exceed
maximum backup copies.

NetBackup status code: 1509
Message: Storage lifecycle policy exceeds maximum backup operations
Explanation: The number of Backup type destinations specified in storage lifecycle
policy exceeds the maximum number of simultaneous copies allowed.
Recommended Action: Verify that the number of Backup type destinations
specified in storage lifecycle policy is less than or equal to 4. (The default value
of the maximum number of allowed simultaneous copies parameter is 4.)

NetBackup status code: 1510
Message: storage lifecycle policy cannot have more than one snapshot operation
Explanation: The list of destinations specified in storage lifecycle policy exceeds
the maximum number of allowed snapshot destinations.
Recommended Action: Verify that the storage lifecycle policy is not configured
with more than one “Snapshot” type of destinations.

NetBackup status code: 1511
Message: storage lifecycle policy must have at least one fixed retention or
snapshot rotation operation
Explanation: The specified storage lifecycle policy does not have any destination
with a retention type of Fixed.
Recommended Action: Verify that the specified storage lifecycle policy has at
least one destination configured with a Fixed retention type.

NetBackup status code: 1512
Message: storage lifecycle policy must have at least one backup, import, or
snapshot operation
Explanation: The specified storage lifecycle policy does not have any backup
destination.
Recommended Action: Verify that the storage lifecycle policy has at least one
Backup type of destination.

NetBackup status code: 1513
Message: invalid priority
Explanation: The duplication priority specified in storage lifecycle policy is not
valid.
Recommended Action: Verify that the duplication priority specified in storage
lifecycle policy is in the range or 0 to 99999.

NetBackup status code: 1514
Message: invalid operation type
Explanation: The destination type specified on one or more destinations in storage
lifecycle policy is not valid.
Recommended Action: Do the following, as appropriate:
¦ Verify that the destination type specified on each destination in storage
lifecycle policy is either Backup, Duplication, or Snapshot.
¦ If you are use the nbstl or bpadm command to configure storage lifecycle
policy, the following are the valid values for the destination type: 0 indicates
Backup, 1 indicates Duplication, and 2 indicates Snapshot.

NetBackup status code: 1515
Message: multiplexing value is not valid or cannot be used where specified
Explanation: The preserve multiplexing flag specified on one or more destinations
is not valid.
Recommended Action: Do the following, as appropriate:
¦ If you use the nbstl command to configure storage lifecycle policy, then verify
that the valid values are used to indicate the preserve multiplexing flag for
each destination. The value “T” or “t” indicates true (Preserve multiplexing).
The value “F” or “f” indicates false (do not preserve multiplexing).
¦ Verify that destinations of type Backup are not configured to preserve
multiplexing.
¦ Verify that destinations of type Snapshot are not configured to preserve
multiplexing.
¦ Verify that destinations of type Duplication that are using disk storage units
are not configured to preserve multiplexing.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1503 to status code 1506

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1503 to Status Code 1506 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1503
Message: Volume pool does not exist or can’t be used where specified
Explanation: The volume pool specified for one or more destinations in storage
lifecycle policy is not valid.
Recommended Action: Do the following, as appropriate:
¦ Verify that the specified volume pool exists in NetBackup database.
¦ Verify that the volume pool is not specified for the Backup destination type
in storage lifecycle policy.
¦ Verify that the volume pool is not specified for the Snapshot destination type
in storage lifecycle policy.
¦ Verify that the volume pool is not specified for the Duplication destination
type that is using disk storage units in storage lifecycle policy.

NetBackup status code: 1504
Message: Server group does not exist or can’t be used where specified
Explanation: The media server group specified for one or more destinations in
storage lifecycle policy is not valid.
Recommended Action: Do the following, as appropriate:
¦ Verify that the specified media server group exists in NetBackup database.
¦ Verify that the media server group is not specified for Backup destination
types in storage lifecycle policy.
¦ Verify that the server group is not specified for Snapshot destination types
in storage lifecycle policy.
¦ Verify that the media server group is not specified for Duplication destination
types that are using disk storage unit in storage lifecycle policy.

NetBackup status code: 1505
Message: alternate read server does not exist or can’t be used where specified
Explanation: The alternate read server specified for one or more destinations in
storage lifecycle policy is not valid.
Recommended Action: Do the following, as appropriate:
¦ Verify that the specified alternate read server exists in the NetBackup database.
¦ Verify that the alternate read server is not specified for Backup destination
types in storage lifecycle policy.
¦ Verify that the alternate read server is not specified for Snapshot destination
types in storage lifecycle policy.

NetBackup status code: 1506
Message: data classification does not exist
Explanation: The data classification specified in storage lifecycle policy is not
valid.
Recommended Action: Verify that the specified data classification exists in the
NetBackup database.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 

Symantec NetBackup status code 1467 to status code 1502

SQLServerF1

Symantec NetBackup product is a backup and recovery product designed for enterprise users. Symantec NetBackup tool can be used to perform backups of SQL Server databases and provides various features.

Below are some of the NetBackup status error codes from Status Code 1467 to Status Code 1502 which may be received while using the Symantec NetBackup tool.

NetBackup status code: 1467
Message: Number of files is 0 and hence not submitting the request for backup
image
Explanation: No files are present for the specified backup ID (-bid) of the
nbindexutil -add command.
RecommendedAction: Do not submit indexing requests for such backup images.

NetBackup status code: 1468
Message: There are no tar copies for snapshot image
Explanation: Only a snapshot copy is present for the specified backup ID (-bid)
of the nbindexutil -add command. A snapshot image which has no tar copies
are not submitted for indexing.
RecommendedAction: Do not submit indexing requests for such backup images.

NetBackup status code: 1500
Message: Storage unit does not exist or can’t be used where specified
Explanation: The storage unit or storage unit group specified for one or more
destinations in storage lifecycle policy is not valid.
Recommended Action: Do the following, as appropriate:
¦ Verify that the specified storage unit or storage unit group exists in the
NetBackup database.
¦ Verify that the specified storage unit is not of type BasicDisk, SnapVault, or
Staging, because storage lifecycle policies do not support them.
¦ Verify that the storage unit is not specified for snapshot destinations in storage
lifecycle policy. Snapshot destinations do not require a storage unit in the
storage lifecycle policy.

NetBackup status code: 1501
Message: Source operation cannot be used where specified
Explanation: The source specified for one or more duplication destinations in
storage lifecycle policy is not valid.
Recommended Action: Do the following, as appropriate:
¦ Verify that the specified source refers to a valid destination in the list of
destinations in storage lifecycle policy.
¦ Verify that the Backup or Snapshot destination type does not have any source
specified. If you are using nbstl to configure storage lifecycle policy, use value
zero (0) as the source for a backup or snapshot destination type.
¦ Verify that the destination that refers to the specified source is not a Snapshot
destination type. NetBackup cannot duplicate a backup image that uses
snapshot copy as a source.
¦ Verify that the specified source does not refer to the destination itself for
which the source is mentioned.
¦ Verify that the specified list of destinations in a storage lifecycle has a circular
dependency for the source.

NetBackup status code: 1502
Message: Retention type cannot be used where specified
Explanation: The retention type specified for one or more destinations in storage
lifecycle policy is not valid.
Recommended Action: Do the following, as appropriate:
¦ Verify that the retention type specified in storage lifecycle policy is either of
Fixed, Staged capacity managed, or Expire after duplication.
¦ Verify that the Expireafterduplication retention type is used for a destination
only if it is specified as a source to other destinations in storage lifecycle policy.
¦ Verify that the Staged capacity managed retention type is used in storage
lifecycle policy only for disk destinations that support Capacitymanagement
capabilities.
¦ Verify that the Snapshot destination type in storage lifecycle policy uses Fixed
retention type only.

Hope this was helpful.

Thanks,
SQLServerF1 Team
In-Depth Blogs on SQL Server, Information about NetBackup status codes, SQL Server Frequently asked questions, SQL Server Trainings.

 
1 2 3 4